Research on a Non-Contact Multi-Electrode Voltage Sensor and Signal Processing Algorithm
Open Access
Abstract
Traditional contact voltage measurement requires a direct electrical connection to the system, which is not easy to install and maintain. The voltage measurement based on the electric field coupling plate capacitance structure does not need to be in contact with the measured object or the ground, which can avoid the above problems. However, most of the existing flat-plate structure voltage measurement sensors are not only expensive to manufacture, but also bulky, and when the relative position between the wire under test and the sensor changes, it will bring great measurement errors, making it difficult to meet actual needs. Aiming to address the above problems, this paper proposes a multi-electrode array structure non-contact voltage sensor and signal processing algorithm. The sensor is manufactured by the PCB process, which effectively reduces the manufacturing cost and process difficulty. The experimental and simulation results show that, when the relative position of the wire and the sensor is offset by 10 mm in the 45° direction, the relative error of the traditional single-electrode voltage sensor is 17.62%, while the relative error of the multi-electrode voltage sensor designed in this paper is only 0.38%. In addition, the ratio error of the sensor under the condition of power frequency of 50 Hz is less than ±1% and the phase difference is less than 4°. The experimental results show that the sensor has good accuracy and linearity.Keywords
Funding Information
- Research and development of new smart sensor technology to promote the development of green energy (202104BN050011)
This publication has 30 references indexed in Scilit:
- Non-contact sensing and modelling on the voltage and electric field for powered transmission lineJournal of Physics: Conference Series, 2020
- Low Power Contactless Voltage Sensor for Low Voltage Power SystemsSensors, 2019
- A Noncontact Voltage Measurement System for Power-Line Voltage WaveformsIEEE Transactions on Instrumentation and Measurement, 2019
- Development of a Nonintrusive True-RMS AC Voltage Measurement ProbeIEEE Transactions on Instrumentation and Measurement, 2019
- Nonintrusive Energy Meter for Nontechnical Losses IdentificationIEEE Transactions on Instrumentation and Measurement, 2019
- High-resistance voltage dividers fabricated by thin polysilicon films in silicon drift detectorsJournal of Materials Science: Materials in Electronics, 2019
- Research on the Algorithm and Test of Transmission Line Voltage Measurement Based on Electric Field Integral MethodIEEE Access, 2018
- An Auto-Balancing Scheme for Non-Contact AC Voltage Measurement2018
- Research on Transmission Line Voltage Measurement Method of D-Dot Sensor Based on Gaussian IntegralSensors, 2018
- Noncontact AC Voltage Measurements: Error and Noise AnalysisIEEE Transactions on Instrumentation and Measurement, 2018