Surface processing for bulk niobium superconducting radio frequency cavities
Authors:
- 21 February 2017
- journal article
- Published by IOP Publishing in Superconductor Science and Technology
- Vol. 30 (4) , 043001
Abstract
The majority of niobium cavities for superconducting particle accelerators continue to be fabricated from thin-walled (2–4 mm) polycrystalline niobium sheet and, as a final step, require material removal from the radio frequency (RF) surface in order to achieve performance needed for use as practical accelerator devices. More recently bulk niobium in the form of, single- or large-grain slices cut from an ingot has become a viable alternative for some cavity types. In both cases the so-called damaged layer must be chemically etched or electrochemically polished away. The methods for doing this date back at least four decades, however, vigorous empirical studies on real cavities and more fundamental studies on niobium samples at laboratories worldwide have led to seemingly modest improvements that, when taken together, constitute a substantial advance in the reproducibility for surface processing techniques and overall cavity performance. This article reviews the development of niobium cavity surface processing, and summarizes results of recent studies. We place some emphasis on practical details for real cavity processing systems which are difficult to find in the literature but are, nonetheless, crucial for achieving the good and reproducible cavity performance. New approaches for bulk niobium surface treatment which aim to reduce cost or increase performance, including alternate chemical recipes, barrel polishing and ‘nitrogen doping’ of the RF surface, continue to be pursued and are closely linked to the requirements for surface processing.Keywords
This publication has 25 references indexed in Scilit:
- Effects of processing history on the evolution of surface damage layer and dislocation substructure in large grain niobium cavitiesPhysical Review Special Topics - Accelerators and Beams, 2015
- Topographic power spectral density study of the effect of surface treatment processes on niobium for superconducting radio frequency accelerator cavitiesPhysical Review Special Topics - Accelerators and Beams, 2012
- Physical and mechanical metallurgy of high purity Nb for accelerator cavitiesPhysical Review Special Topics - Accelerators and Beams, 2010
- The role of near-surface dislocations in the high magnetic field performance of superconducting niobium cavitiesSuperconductor Science and Technology, 2010
- A comparative study of hard turned and cylindrically ground white layersInternational Journal of Machine Tools and Manufacture, 2004
- A new method of electropolishing niobiumPhysics Letters A, 1971
- Chemical Polish for Niobium Microwave StructuresJournal of Applied Physics, 1970
- A Nb TM010 MODE CAVITY WITH HIGH ELECTRIC FIELD AND Q0Applied Physics Letters, 1968
- Microwave Surface Resistance of Superconducting NiobiumJournal of Applied Physics, 1968
- Measurements on two Nb superconductive RF cavitiesPhysics Letters, 1962