Study of the thermal properties of filaments for 3D printing
- 1 January 2016
- conference paper
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 1752 (1) , 040027
Abstract
Various materials are used for 3D printing, most commonly Acrylonitrile butadiene styrene (ABS), Polylactic acid (PLA), Polyethylene (PET) and Polypropylene (PP). These materials differ mainly in their melting point, which significantly influences the properties of the final products. Filaments are melted in the print head during the printing process. The temperature range is from 150 °C to 250 °C depending on the technology used. The optimum temperature for the cooling substrate on which printing is carried out is chosen so as to ensure uniform cooling and deformation. It generally varies between (40 – 100) °C. From the above it is clear that both temperatures can significantly affect the properties of the printed 3D object. It is therefore important to determine the thermal parameters (thermal conductivity, specific heat and thermal diffusivity) of the materials used across the entire range of temperatures. For evaluating the properties of different types of PLA materials, the step transient method was used, which allows determination of all required parameters using a fractal heat transfer model.Keywords
This publication has 4 references indexed in Scilit:
- Thermal Properties of Mannitol DerivativeAdvanced Materials Research, 2015
- Study of thermal properties of insulating materialsAIP Conference Proceedings, 2015
- Use of PCM Boards for Solar Cell CoolingInternational Journal of Thermophysics, 2012
- Fractal–cantorian geometry of space-timeChaos, Solitons & Fractals, 2009