A COMPARATIVE STUDY ON THE SINGLE AND DOUBLE-LAYERED DEPOSITION OF ALUMINUM 6063 OVER EN8 MEDIUM CARBON STEEL USING FRICTION SURFACING
- 17 August 2022
- journal article
- research article
- Published by World Scientific Pub Co Pte Ltd in Surface Review and Letters
- Vol. 29 (10)
Abstract
This work estimates the optimum process parameters for the double-layer deposition of aluminum 6063 over EN8 medium carbon steel using friction surfacing. The control process parameters like axial force and feed rate of the consumable rod on two different deposition surface conditions, i.e. a good interface and a course interface during the process were investigated. The second layer deposition was performed over the roughness developed after the first layer deposition and contributed largely to the mechanical anchoring mechanism at the second coating interface. Assessment of the mechanical strength at the first coating interface (substrate/ coating 1) and second coating interface (coating 1/ coating 2) through bending and microhardness tests at both the interfaces was performed. The bending test results disclosed the existence of small delamination with no cracking at the second interface with a feed rate of 150[ ]mm/min at axial force of 5[ ]kN. An increase of 16.2% in the hardness value of consumable aluminum was seen at the first coating interface region. In contrast, the mean hardness at the second coating interface region was nearly the same as that of the consumable rod. Extensive studies of the surface coating and the microstructural features at both interfaces were performed through FESEM and EDAX analyses.Keywords
This publication has 29 references indexed in Scilit:
- Weldability and joining characteristics of AISI 420/AISI 1020 steels using friction weldingInternational Journal of Materials Research, 2013
- Microstructures and properties of friction surfaced coatings in AISI 440C martensitic stainless steelSurface and Coatings Technology, 2012
- Friction surfacing on nonferrous substrates: a feasibility studyThe International Journal of Advanced Manufacturing Technology, 2012
- Tool steel and copper coatings by friction surfacing – A thermography studyJournal of Materials Processing Technology, 2012
- Investigations on Joining Surface Hardened Steels by Friction WeldingMaterials Testing, 2011
- Friction surfacing of titanium alloy with aluminium metal matrix compositeSurface Engineering, 2011
- Mechanical Properties of 5052/2017 Dissimilar Aluminum Alloys Deposit by Friction SurfacingMATERIALS TRANSACTIONS, 2006
- Decision support system to optimise the Frictec (friction surfacing) processJournal of Materials Processing Technology, 2000
- The effect of metal type and multi-layering on friction surfacingJournal of Materials Processing Technology, 1996
- Adhesion of advanced overlay coatings: mechanisms and quantitative assessmentSurface and Coatings Technology, 1995