Highly crystallized and tough polylactic acid through addition of surface modified cellulose nanocrystals
- 29 July 2022
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (37)
Abstract
To prepare a fully organic polylactic acid (PLA)‐based bio‐nanocomposite, cellulose nanocrystals (CNCs) were grafted by PLA through ring‐opening polymerization (ROP) of L‐lactide monomers onto CNCs. The grafting process was evaluated by 1HNMR and FTIR spectroscopic methods. The effect of surface‐modified CNCs (M‐CNCs) was investigated on thermal, mechanical, rheological, and dynamic mechanical thermal properties of PLA. The M‐CNCs were successfully dispersed in the PLA matrix. Isothermal and non‐isothermal DSC studies revealed that M‐CNCs caused an intensive increase in crystallization kinetics and therefore nucleation density and crystallization extent. DSC, XRD, and DMTA analyses indicated the formation of different crystal structures [α, α', β] in PLA after addition of M‐CNCs. Rheological analysis was carried out for microstructural investigation of the nanocomposites. Interestingly, after the addition of M‐CNCs not only the tensile strength and modulus of the samples increased but also the toughness of PLA was considerably improved.Keywords
This publication has 56 references indexed in Scilit:
- Poly(lactic acid) crystallizationProgress in Polymer Science, 2012
- Grafting of cellulose by ring-opening polymerisation – A reviewEuropean Polymer Journal, 2012
- Influence of clay content on the melting behavior and crystal structure of nonisothermal crystallized poly(L‐lactic acid)/nanocompositesJournal of Applied Polymer Science, 2011
- Crystallization Behavior of Carbon Nanotube−Polylactide NanocompositesMacromolecules, 2011
- Effect of organically modified layered silicate nanoclay on the dynamic viscoelastic properties of thermoplastic polyurethane nanocompositesApplied Clay Science, 2011
- Poly(ɛ-caprolactone) based nanocomposites reinforced by surface-grafted cellulose nanowhiskers via extrusion processing: Morphology, rheology, and thermo-mechanical propertiesPolymer, 2011
- Cellulose nanowhiskers: promising materials for advanced applicationsSoft Matter, 2010
- Isothermal Crystallization of Poly(l-lactide) Induced by Graphene Nanosheets and Carbon Nanotubes: A Comparative StudyMacromolecules, 2010
- Grafting of Cellulose Fibers with Poly(ε-caprolactone) and Poly(l-lactic acid) via Ring-Opening PolymerizationBiomacromolecules, 2006
- Nanotube Networks in Polymer Nanocomposites: Rheology and Electrical ConductivityMacromolecules, 2004