Fatemeh Goharpey
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Fatemeh Goharpey has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
Jafar Khademzadeh Yeganeh
Polymer Engineering Department Qom University of Technology Qom Iran
9 shared publications- Reza Foudazi
University of Oklahoma
7 shared publications Reza Foudazi
New Mexico State University
6 shared publicationsJaber Nasrollah Gavgani
Department of Polymer Engineering and Color Technology Amirkabir University of Technology Tehran Iran
5 shared publicationsZahra Daneshfar
Amirkabir University of Technology
4 shared publicationsAmir Faramarzi Jolfaei
Amirkabir University of Technology
2 shared publications
Latest Publications
- 23 July 2026
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 34 (8) , 201
Electroactive Thermally-Induced Shape Memory PEG-Plasticized Polymer Nanocomposites Based on TPU/PLA with CNC and MWCNT
- 23 July 2026
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 34 (8) , 201
Electroactive Thermally-Induced Shape Memory PEG-Plasticized Polymer Nanocomposites Based on TPU/PLA with CNC and MWCNT
- 15 June 2026
- Published by Springer Nature in Korea-Australia Rheology Journal
- Vol. 38 (3) , 419-433
Tuning the rheology of soft colloidal suspensions: the dual role of particle deformability and matrix viscoelasticity
- 15 June 2026
- Published by Springer Nature in Korea-Australia Rheology Journal
- Vol. 38 (3) , 419-433
Tuning the rheology of soft colloidal suspensions: the dual role of particle deformability and matrix viscoelasticity
- 14 May 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (5) , 1-11
Surface functionalization of nanoparticles for enhanced polymer-nanoparticle interactions in nanocomposites
- 14 May 2025
- Published by Springer Nature in Journal of Polymer Research
- Vol. 32 (5) , 1-11
Surface functionalization of nanoparticles for enhanced polymer-nanoparticle interactions in nanocomposites
- Open Access
- 1 April 2025
- Published by Springer Nature in Research Square
Surface Functionalization of Nanoparticles for Enhanced Polymer-Nanoparticle Interactions in Nanocomposites
Integrating nanoparticles (NPs) into a polymer matrix represents a promising approach to enhancing the characteristics of the polymer. Such improvements are closely related to the dispersion of the NPs and the interfaces between phases, both of which are significantly affected by the surface functionality of the NPs. In this study, we have investigated the effects of different surface functionalities of silica NPs on the particle dispersion and properties of polymer nanocomposites (PNCs). Specifically, we have found that the surface treatment of silica NPs with hydrocarbon groups can decrease particle surface tension and interparticle interactions, resulting in the polymer and particles interaction. Additionally, this treatment can reduce the tendency of NPs to aggregate and agglomerate. As a consequence, the particle dispersion, rheological properties, and mechanical behavior of PNCs are all influenced by the surface treatment of NPs.
- 1 April 2025
- Published by Springer Nature in Research Square
Open AccessSurface Functionalization of Nanoparticles for Enhanced Polymer-Nanoparticle Interactions in Nanocomposites
Integrating nanoparticles (NPs) into a polymer matrix represents a promising approach to enhancing the characteristics of the polymer. Such improvements are closely related to the dispersion of the NPs and the interfaces between phases, both of which are significantly affected by the surface functionality of the NPs. In this study, we have investigated the effects of different surface functionalities of silica NPs on the particle dispersion and properties of polymer nanocomposites (PNCs). Specifically, we have found that the surface treatment of silica NPs with hydrocarbon groups can decrease particle surface tension and interparticle interactions, resulting in the polymer and particles interaction. Additionally, this treatment can reduce the tendency of NPs to aggregate and agglomerate. As a consequence, the particle dispersion, rheological properties, and mechanical behavior of PNCs are all influenced by the surface treatment of NPs.
- 24 April 2024
- Published by Society of Rheology in Journal of Rheology
- Vol. 68 (3) , 479-490
Shear thickening and hysteresis in dense suspensions: The effect of particle shape
The flow of dense suspension of non-Brownian particles has been considered by various studies affected by their significance in a variety of industries and natural phenomena. In this study, we investigate the effect of polyhedron morphology on shear thickening, shear jamming, and hysteresis characteristics of non-Brownian suspension of acrylate particles. Particles with the same chemical nature and three different shapes of spherical (aspect ratio Γ = 1), elliptical paraboloid (Γ ≈ 1), and boat-shaped (Γ ≈ 3) are fabricated via photopolymerization-based methods. Studied suspensions show the shear-thinning behavior at low shear stresses and shear thickening behavior at the higher range of shear stress. Also, the strength of observed shear thickening is enhanced for the suspensions of polyhedron particles, which can be attributed to the heightened degree of interparticle frictional contacts. Furthermore, it is found that angularity not only shifts the predicted frictionless and frictional jamming packing fractions to lower values but also expands the shear jamming packing fraction range. Finally, a history-dependent hysteresis is observed in all samples due to the different particle spatial structures forming in ascending and descending flow modes. The observed hysteresis loops strongly depend on the volume fraction and diminish near the jamming packing fraction due to the restricted mobility space of particles. In addition, the tumbling of elongated particles also can decrease the hysteresis loop by enhancing viscosity in the ascending flow mode, where the structures are not fully developed.
- 24 April 2024
- Published by Society of Rheology in Journal of Rheology
- Vol. 68 (3) , 479-490
Shear thickening and hysteresis in dense suspensions: The effect of particle shape
The flow of dense suspension of non-Brownian particles has been considered by various studies affected by their significance in a variety of industries and natural phenomena. In this study, we investigate the effect of polyhedron morphology on shear thickening, shear jamming, and hysteresis characteristics of non-Brownian suspension of acrylate particles. Particles with the same chemical nature and three different shapes of spherical (aspect ratio Γ = 1), elliptical paraboloid (Γ ≈ 1), and boat-shaped (Γ ≈ 3) are fabricated via photopolymerization-based methods. Studied suspensions show the shear-thinning behavior at low shear stresses and shear thickening behavior at the higher range of shear stress. Also, the strength of observed shear thickening is enhanced for the suspensions of polyhedron particles, which can be attributed to the heightened degree of interparticle frictional contacts. Furthermore, it is found that angularity not only shifts the predicted frictionless and frictional jamming packing fractions to lower values but also expands the shear jamming packing fraction range. Finally, a history-dependent hysteresis is observed in all samples due to the different particle spatial structures forming in ascending and descending flow modes. The observed hysteresis loops strongly depend on the volume fraction and diminish near the jamming packing fraction due to the restricted mobility space of particles. In addition, the tumbling of elongated particles also can decrease the hysteresis loop by enhancing viscosity in the ascending flow mode, where the structures are not fully developed.
- 10 July 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (36)
Compatibilization of immiscible polymer blends by reactive polymer grafted graphene with interfacial crosslinking
We investigate reactive compatibilization by applying two multifunctional polymers grafted on a graphene surface, which leads to crosslinked interphase at immiscible polymer blends. Reactive compatibilizer‐grafted graphene (RCG) nanoparticles were synthesized through esterification and amidation reactions between oxidative groups of graphene oxide and reactive multifunctional groups of polymers. Polymer blends of polyisoprene (PI) and polydimethysiloxane (PDMS) with PI:PDMS ratio of 30:70 or 70:30 and RCG nanoparticle loadings from 0.1 and 1 wt% were evaluated by optical microscopy and rheometry. The results indicated that the blend with 0.1 wt% RCG showed unusual characteristics including nonspherical and bridged droplets, while those containing 1 wt% RCG showed usual droplet‐matrix morphology. The rheological results are also asymmetric: the blend with 0.1 wt% RCG displayed gel‐like behavior in the dynamic oscillatory tests, high viscosity, slow interfacial relaxation during startup shear flow, and divergence in the transient stress response due to coalesced and bridged droplets. However, the latter blend containing 1 wt% RCG reveals liquid‐like behavior, low viscosity, and convergence in the transient stress response due to stabilized droplet‐matrix morphology. Overall, it was suggested that these asymmetries are attributable to interfacial crosslinked interphase formed through an in‐situ reaction between multifunctional polymers grafted on graphene sheets.
- 10 July 2023
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 140 (36)
Compatibilization of immiscible polymer blends by reactive polymer grafted graphene with interfacial crosslinking
We investigate reactive compatibilization by applying two multifunctional polymers grafted on a graphene surface, which leads to crosslinked interphase at immiscible polymer blends. Reactive compatibilizer‐grafted graphene (RCG) nanoparticles were synthesized through esterification and amidation reactions between oxidative groups of graphene oxide and reactive multifunctional groups of polymers. Polymer blends of polyisoprene (PI) and polydimethysiloxane (PDMS) with PI:PDMS ratio of 30:70 or 70:30 and RCG nanoparticle loadings from 0.1 and 1 wt% were evaluated by optical microscopy and rheometry. The results indicated that the blend with 0.1 wt% RCG showed unusual characteristics including nonspherical and bridged droplets, while those containing 1 wt% RCG showed usual droplet‐matrix morphology. The rheological results are also asymmetric: the blend with 0.1 wt% RCG displayed gel‐like behavior in the dynamic oscillatory tests, high viscosity, slow interfacial relaxation during startup shear flow, and divergence in the transient stress response due to coalesced and bridged droplets. However, the latter blend containing 1 wt% RCG reveals liquid‐like behavior, low viscosity, and convergence in the transient stress response due to stabilized droplet‐matrix morphology. Overall, it was suggested that these asymmetries are attributable to interfacial crosslinked interphase formed through an in‐situ reaction between multifunctional polymers grafted on graphene sheets.
- 24 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (11) , 16298-16314
Charge Transport in Functionalized Octopus-Shaped Multi-Walled Carbon Nanotube/Graphene Hybrids: Implications for Extremely Stretchable Conductors
- 24 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Nano Materials
- Vol. 5 (11) , 16298-16314
Charge Transport in Functionalized Octopus-Shaped Multi-Walled Carbon Nanotube/Graphene Hybrids: Implications for Extremely Stretchable Conductors
- 29 July 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (37)
Highly crystallized and tough polylactic acid through addition of surface modified cellulose nanocrystals
To prepare a fully organic polylactic acid (PLA)‐based bio‐nanocomposite, cellulose nanocrystals (CNCs) were grafted by PLA through ring‐opening polymerization (ROP) of L‐lactide monomers onto CNCs. The grafting process was evaluated by 1HNMR and FTIR spectroscopic methods. The effect of surface‐modified CNCs (M‐CNCs) was investigated on thermal, mechanical, rheological, and dynamic mechanical thermal properties of PLA. The M‐CNCs were successfully dispersed in the PLA matrix. Isothermal and non‐isothermal DSC studies revealed that M‐CNCs caused an intensive increase in crystallization kinetics and therefore nucleation density and crystallization extent. DSC, XRD, and DMTA analyses indicated the formation of different crystal structures [α, α', β] in PLA after addition of M‐CNCs. Rheological analysis was carried out for microstructural investigation of the nanocomposites. Interestingly, after the addition of M‐CNCs not only the tensile strength and modulus of the samples increased but also the toughness of PLA was considerably improved.
- 29 July 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (37)
Highly crystallized and tough polylactic acid through addition of surface modified cellulose nanocrystals
To prepare a fully organic polylactic acid (PLA)‐based bio‐nanocomposite, cellulose nanocrystals (CNCs) were grafted by PLA through ring‐opening polymerization (ROP) of L‐lactide monomers onto CNCs. The grafting process was evaluated by 1HNMR and FTIR spectroscopic methods. The effect of surface‐modified CNCs (M‐CNCs) was investigated on thermal, mechanical, rheological, and dynamic mechanical thermal properties of PLA. The M‐CNCs were successfully dispersed in the PLA matrix. Isothermal and non‐isothermal DSC studies revealed that M‐CNCs caused an intensive increase in crystallization kinetics and therefore nucleation density and crystallization extent. DSC, XRD, and DMTA analyses indicated the formation of different crystal structures [α, α', β] in PLA after addition of M‐CNCs. Rheological analysis was carried out for microstructural investigation of the nanocomposites. Interestingly, after the addition of M‐CNCs not only the tensile strength and modulus of the samples increased but also the toughness of PLA was considerably improved.
- 22 November 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (48) , 14034-14042
Surface Morphology Signature of Critical Separated Length and Glass Transition Temperature during Seeded Dispersion Polymerization
The properties of colloids are considerably affected by particles’ surface morphology. In this work, for understanding the mechanism of roughness formation in polymeric core–shell (CS) particles, the surface morphology of synthesized CS particles through seeded dispersion polymerization (SDP) in the presence of poly(methyl methacrylate) seeds was investigated. The results revealed that shell polymers with higher solubility parameters (δ) and glass transition temperatures (Tg) had a rougher surface. These parameters directly affect the time needed for chain deformation, which is a critical parameter in controlling the final morphology. We suggested a relation based on these parameters to predict the surface morphology (smoothness or roughness) of CS particles synthesized through SDP in water.
- 22 November 2021
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 37 (48) , 14034-14042
Surface Morphology Signature of Critical Separated Length and Glass Transition Temperature during Seeded Dispersion Polymerization
The properties of colloids are considerably affected by particles’ surface morphology. In this work, for understanding the mechanism of roughness formation in polymeric core–shell (CS) particles, the surface morphology of synthesized CS particles through seeded dispersion polymerization (SDP) in the presence of poly(methyl methacrylate) seeds was investigated. The results revealed that shell polymers with higher solubility parameters (δ) and glass transition temperatures (Tg) had a rougher surface. These parameters directly affect the time needed for chain deformation, which is a critical parameter in controlling the final morphology. We suggested a relation based on these parameters to predict the surface morphology (smoothness or roughness) of CS particles synthesized through SDP in water.
- 1 October 2021
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (42) , 9670-9681
Interfacially compatibilized PI/PDMS blends with reduced octadecylamine-functionalized graphene oxide: morphological and rheological properties
Interfacial compatibilization effect of reduced octadecylamine-functionalized graphene oxide on the morphological and rheological properties of immiscible homopolymer blends.
- 1 October 2021
- Published by Royal Society of Chemistry (RSC) in Soft Matter
- Vol. 17 (42) , 9670-9681
Interfacially compatibilized PI/PDMS blends with reduced octadecylamine-functionalized graphene oxide: morphological and rheological properties
Interfacial compatibilization effect of reduced octadecylamine-functionalized graphene oxide on the morphological and rheological properties of immiscible homopolymer blends.