Wear Behavior of Al2O3/Ti3AlC2-MAX Composites at Elevated Temperatures
Open Access
Abstract
This paper investigates the effect of Ti3AlC2-MAX phase addition as a solid lubricant to Al2O3. The composites were prepared using powder metallurgy and consolidated by Spark Plasma Sintering (SPS). The influence of Ti3AlC2 addition on phase composition and mechanical and tribological properties was evaluated. The use of MAX phase allows for the fabrication of sintered materials characterized by high density, a hardness close to 2000 HV5, and a fracture toughness of 5.5 MPa*m0.5 for the sample containing 10 wt.% Ti3AlC2. Moreover, a significant reduction in wear of the composites was observed for friction tests conducted at 700 °C compared to the unreinforced sample. The research demonstrates that Ti3AlC2 can serve as a solid lubricant and exhibits the best performance at high temperatures.Keywords
Funding Information
- Ministry of Science and Higher Education Republic of Poland
This publication has 30 references indexed in Scilit:
- Microstructure and tribological performance of Ni60-based composite coatings on Ti6Al4V alloy with different Ti3SiC2 ceramic additions by laser claddingCeramics International, 2020
- Mechanical properties and tribological performance of alumina matrix composites reinforced with graphene-family materialsCeramics International, 2020
- Comprehensive study on graphene-based reinforcements in Al2O3–ZrO2 and Al2O3–Ti(C,N) systems and their effect on mechanical and tribological propertiesCeramics International, 2019
- Turning of Inconel 718 with whisker-reinforced ceramic tools applying vegetable-based cutting fluid mixed with solid lubricants by MQLJournal of Materials Processing Technology, 2019
- Tribological performance of alumina matrix composites reinforced with nickel-coated grapheneCeramics International, 2018
- Mechanical properties of Ti 3 AlC 2 ceramics before and after heat treatmentRare Metals, 2015
- In situ diffraction study of thermal decomposition in Maxthal Ti2AlCJournal of Alloys and Compounds, 2011
- High-temperature thermal stability of Ti2AlN and Ti4AlN3: A comparative diffraction studyJournal of the European Ceramic Society, 2011
- Towards the synthesis of MAX-phase functional coatings by pulsed laser depositionApplied Surface Science, 2007
- Densification of SiC by SPS-effects of time, temperature and pressureJournal of the European Ceramic Society, 2007