Cyclic loading test of precast concrete load-bearing walls designed for gravitational loading
Authors:
- 1 June 2021
- journal article
- research article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 73 (12) , 595-607
Abstract
A series of quasistatic cyclic loading tests was carried out on seven quarter-scale precast concrete bearing walls designed primarily for gravitational loading. Three of the most commonly used types of connection in Thailand were assessed: (i) welded, with short rebars, (ii) welded, with steel angles, and (iii) grouted corrugated ducts. The effects of gravitational loading at between 0 and 5·0% of wall axial load ratio were also investigated. Specimen performance was analysed in terms of observed behaviour and damage, force–drift relation and energy dissipation, with the results revealing that the walls connected using welded steel angles had less strength and ductility than the others. The gravitational load significantly affected the failure modes of the walls, with lower loadings tending to lead to deformation via a rocking mode and subsequent failure at the connections, while diagonal compression failure on the panel could occur at gravitational loads of 5%. It was also found that walls with welded short rebar connections could develop a degree of strength, stiffness, ductility and energy dissipation. Under testing against ACI ITG-5.1 criteria, the corrugated duct connections performed best, suggesting the usefulness of implementing an improved version of this connection type for construction in seismic hazard areas.Keywords
This publication has 20 references indexed in Scilit:
- Behavior of Precast Concrete Shear Walls for Seismic Regions: Comparison of Hybrid and Emulative SpecimensJournal of Structural Engineering, 2013
- Design and Measured Behavior of a Hybrid Precast Concrete Wall Specimen for Seismic RegionsJournal of Structural Engineering, 2011
- Probabilistic seismic hazard assessment for ThailandBulletin of Earthquake Engineering, 2010
- Seismic Performance of Self-Centering Structural Walls Incorporating Energy DissipatorsJournal of Structural Engineering, 2007
- Seismic Performance of Precast Reinforced and Prestressed Concrete WallsJournal of Structural Engineering, 2003
- Hybrid Post-Tensioned Precast Concrete Walls for Use in Seismic RegionsPCI Journal, 2002
- Seismic Behavior of Squat Reinforced Concrete Shear WallsEarthquake Spectra, 2002
- Preliminary Results and Conclusions From the PRESSS Five-Story Precast Concrete Test BuildingPCI Journal, 1999
- Observations on the Performance of Structures in the Kobe Earthquake of January 17, 1995PCI Journal, 1995
- 1. The Mexico Earthquake of September 19, 1985—Analysis of Building ResponseEarthquake Spectra, 1989