Intensified CO2 Absorption Process Using a Green Solvent: Rate-Based Modelling, Sensitivity Analysis, and Scale-Up
Open Access
- 22 November 2025
- Vol. 13 (12) , 3774
Abstract
Ionic liquids (ILs) are recognized as environmentally friendly solvents due to their high CO2 absorption capacity, ease of recovery, and chemical stability, making them a promising alternative to conventional solvents for CO2 capture. In this study, a rate-based mathematical model was developed for a rotating packed bed (RPB) absorber employing 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) as the solvent. The model incorporates mass, energy, and momentum balances, coupled with a thermodynamic model whose parameters were determined using experimental data. The rate-based model was validated against experimental results obtained from the RPB absorber. To enhance predictive accuracy, a sensitivity analysis of various mass transfer correlations was conducted, and simulations were performed based on the outcomes of this analysis. The model provided detailed radial profiles of pressure, gas and liquid flow rates, CO2 concentration, temperature, volumetric mass transfer coefficients, and both gas- and liquid-phase resistances. The results indicated that the CO2 capture efficiency and mass transfer coefficients in both phases increased with rotational speed along the bed’s radial direction. Furthermore, the RPB was designed for a flue gas stream from a fired heater in a petrochemical unit containing 10.74 mol % CO2. The optimal liquid-to-gas ratio at a large scale was found to be 0.3 kg/kg, achieving a CO2 removal efficiency of 98%. Under these conditions, the required motor power at an outer radius of 1.55 m was approximately 24.6 kW. Furthermore, comparison with a conventional packed bed showed that the liquid-phase volumetric mass transfer coefficient in the RPB was significantly higher, confirming its superior mass transfer performance.Keywords
This publication has 42 references indexed in Scilit:
- Assessment of mass transfer performance using the two-film theory and surrogate models for intensified CO2 capture process by amine solutions in rotating packed bedsChemical Engineering and Processing - Process Intensification, 2024
- Proposal and investigation of CO2 capture from fired heater flue gases to increase methanol production: A case studyEnergy, 2023
- Integrated ionic liquid and rate‐based absorption process design for gas separation: Global optimization using hybrid modelsAIChE Journal, 2021
- Assessment of mass transfer intensification potential for a CO2 capture process using three-phase fluidized bedChemical Engineering and Processing - Process Intensification, 2020
- Process analysis overview of ionic liquids on CO2 chemical captureChemical Engineering Journal, 2020
- Gas–liquid mass‐transfer properties in CO2 absorption system with ionic liquidsAIChE Journal, 2014
- Efficient capture of carbon dioxide with novel mass‐transfer intensification device using ionic liquidsAIChE Journal, 2013
- Analysis of flow in rotating packed beds via CFD simulations—Dry pressure drop and gas flow maldistributionChemical Engineering Science, 2009
- Wirkungsweise von FüllkörperschüttungenChemie Ingenieur Technik, 1976
- Effective interfacial area in irrigated packed columnsChemical Engineering Science, 1974