Seyedsaman Mousavian
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Seyedsaman Mousavian has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Mohammad Shamsi
Process Engineering Department, Faculty of Chemical Engineering, Tarbiat Modares University, Tehran, Iran
1 shared publication - Morteza Afkhamipour
National Iranian Gas Company, South Pars Gas Complex, Asaluyeh 75391-311, Iran
1 shared publication - Tohid Nejad Ghaffar Borhani
Centre for Engineering Innovation and Research, School of Engineering, Computing and Mathematical Sciences, University of Wolverhampton, Wolverhampton WV1 1LY, UK
1 shared publication
Latest Publications
- Open Access
Intensified CO2 Absorption Process Using a Green Solvent: Rate-Based Modelling, Sensitivity Analysis, and Scale-Up
Ionic liquids (ILs) are recognized as environmentally friendly solvents due to their high CO2 absorption capacity, ease of recovery, and chemical stability, making them a promising alternative to conventional solvents for CO2 capture. In this study, a rate-based mathematical model was developed for a rotating packed bed (RPB) absorber employing 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) as the solvent. The model incorporates mass, energy, and momentum balances, coupled with a thermodynamic model whose parameters were determined using experimental data. The rate-based model was validated against experimental results obtained from the RPB absorber. To enhance predictive accuracy, a sensitivity analysis of various mass transfer correlations was conducted, and simulations were performed based on the outcomes of this analysis. The model provided detailed radial profiles of pressure, gas and liquid flow rates, CO2 concentration, temperature, volumetric mass transfer coefficients, and both gas- and liquid-phase resistances. The results indicated that the CO2 capture efficiency and mass transfer coefficients in both phases increased with rotational speed along the bed’s radial direction. Furthermore, the RPB was designed for a flue gas stream from a fired heater in a petrochemical unit containing 10.74 mol % CO2. The optimal liquid-to-gas ratio at a large scale was found to be 0.3 kg/kg, achieving a CO2 removal efficiency of 98%. Under these conditions, the required motor power at an outer radius of 1.55 m was approximately 24.6 kW. Furthermore, comparison with a conventional packed bed showed that the liquid-phase volumetric mass transfer coefficient in the RPB was significantly higher, confirming its superior mass transfer performance.
Open AccessIntensified CO2 Absorption Process Using a Green Solvent: Rate-Based Modelling, Sensitivity Analysis, and Scale-Up
Ionic liquids (ILs) are recognized as environmentally friendly solvents due to their high CO2 absorption capacity, ease of recovery, and chemical stability, making them a promising alternative to conventional solvents for CO2 capture. In this study, a rate-based mathematical model was developed for a rotating packed bed (RPB) absorber employing 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]) as the solvent. The model incorporates mass, energy, and momentum balances, coupled with a thermodynamic model whose parameters were determined using experimental data. The rate-based model was validated against experimental results obtained from the RPB absorber. To enhance predictive accuracy, a sensitivity analysis of various mass transfer correlations was conducted, and simulations were performed based on the outcomes of this analysis. The model provided detailed radial profiles of pressure, gas and liquid flow rates, CO2 concentration, temperature, volumetric mass transfer coefficients, and both gas- and liquid-phase resistances. The results indicated that the CO2 capture efficiency and mass transfer coefficients in both phases increased with rotational speed along the bed’s radial direction. Furthermore, the RPB was designed for a flue gas stream from a fired heater in a petrochemical unit containing 10.74 mol % CO2. The optimal liquid-to-gas ratio at a large scale was found to be 0.3 kg/kg, achieving a CO2 removal efficiency of 98%. Under these conditions, the required motor power at an outer radius of 1.55 m was approximately 24.6 kW. Furthermore, comparison with a conventional packed bed showed that the liquid-phase volumetric mass transfer coefficient in the RPB was significantly higher, confirming its superior mass transfer performance.