Epoxy/Layered Double Hydroxide Nanocomposites: Investigating the Influence of Preparation Method on Mechanical Properties
Authors:
- Daiva ZeleniakieneDaiva Zeleniakiene
- Kristina ZukieneKristina Zukiene
- Stanislav StankevichSSStanislav Stankevich
- Petr KnotekPKPetr Knotek
- Claudia M. RochaCRClaudia M. Rocha
- Jakub OprsalJOJakub Oprsal
- Rochele PintoRPRochele Pinto
- Sigitas KilikevičiusSigitas Kilikevičius
- Cristina NevesCNCristina Neves
- João TedimJoão Tedim
Open Access
Abstract
This study investigates the macro- and micromechanical properties of epoxy-based nanocomposites containing Mg-Al/NO3 layered double hydroxides (LDHs), with a comparative evaluation of two preparation routes: solvent exchange and direct drying from an aqueous LDH slurry. LDHs were characterised using atomic force microscopy (AFM), scanning transmission electron microscopy, and X-ray diffraction methods. Tensile tests and AFM nanomechanical mapping were used to obtain the macro- and micromechanical properties of LDH/epoxy nanocomposites, respectively. Both preparation methods resulted in nanocomposites with comparable mechanical performance. Young’s modulus increased by approximately 30–70% at lower LDH loadings (1–2 wt.%), and the ultimate tensile strength remained largely unchanged compared to pure epoxy. At higher LDH contents, tensile strength decreased by approximately 15–26%, while fracture strain decreased by up to 54%, which was attributed to particle aggregation, as confirmed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The mechanical response and stiffness maps obtained by the peak force AFM nanomechanical mapping revealed that nanocomposites prepared using solvent-exchanged LDHs exhibit significantly narrower interfacial widths and higher stiffness compared to those made by the conventional approach, indicating improved interfacial bonding and mechanical performance. Overall, the solvent-exchange approach proved effective for improving the interfacial properties and stiffness of epoxy/LDH nanocomposites.Keywords
Funding Information
- European Commission (101007430)
- European Regional Development Fund (CZ.02.01.01/00/23_021/0008593)
- CICECO-Aveiro Institute of Materials (UIDB/50011/2020)
- CICECO-Aveiro Institute of Materials (UIDP/50011/2020)
- CICECO-Aveiro Institute of Materials (LA/P/0006/2020)
- FCT
This publication has 44 references indexed in Scilit:
- Tailoring materials for their need: Sustainable layered double hydroxide polymer compositesJournal of Polymer Science, 2023
- Recent advances in the synthesis of layered double hydroxides nanosheetsBulletin of the Korean Chemical Society, 2022
- Nanoarchitectured two-dimensional layered double hydroxides-based nanocomposites for biomedical applicationsAdvanced Drug Delivery Reviews, 2022
- In‐Situ Incorporation of Pt Nanoparticles on Layered Double Hydroxides for Selective Conversion of Cinnamaldehyde to Cinnamyl AlcoholChemistrySelect, 2021
- Green corrosion inhibitors intercalated Mg:Al layered double hydroxide coatings to protect Mg alloyRare Metals, 2020
- Magnetic Fe3O4 based layered double hydroxides (LDHs) nanocomposites (Fe3O4/LDHs): recent review of progress in synthesis, properties and applicationsJournal of Nanostructure in Chemistry, 2018
- Evaluation of mechanical properties of Mg-Al layered double hydroxide as a filler in epoxy-based FML compositesThe International Journal of Advanced Manufacturing Technology, 2018
- The Effect of the Addition of Mg-Al LDH Intercalated with Dodecyl Sulfate on the Fire Retardancy Properties of EpoxyMacromolecular Symposia, 2012
- Layered Double Hydroxides2006
- Structural and IR relations among brucite-like divalent metal hydroxidesPhysics and Chemistry of Minerals, 1984