Gate-enclosed NMOS transistors
Authors:
- Xue FanXFXue Fan
- Wei LiWLWei Li
- Bin HuBHBin Hu
- 1 August 2011
- journal article
- Published by IOP Publishing in Journal of Semiconductors
- Vol. 32 (8) , 084002-49
Abstract
In order to quantitatively compare the design cost and performance of various gate styles, NMOS transistors with two-edged, annular and ring gate layouts were designed and fabricated by a commercial 0.35 μm CMOS process. By comparing the minimum W/L ratios and transistor areas, it was found that either the annular layout or its ring counterpart incurs a higher area penalty that depends on the W/L ratio of the transistor to be designed. Furthermore, by comparing the output and transfer characteristics of the transistors and analyzing the popular existing methods for extracting the effective W/L ratio, it was shown that the mid-line approximation for annular NMOS could incur an error of more than 10%. It was also demonstrated that the foundry-provided extraction tool needs significant adaptation when being applied to the enclosed-gate transistors, since it is targeted only toward the two-edged transistor. A simple approach for rough extraction of the W/L ratio for the ring-gate NMOS was presented and its effectiveness was confirmed by the experimental results with an error up to 8%.Keywords
This publication has 9 references indexed in Scilit:
- Current and Future Challenges in Radiation Effects on CMOS ElectronicsIEEE Transactions on Nuclear Science, 2010
- Hot carrier effects of SOI NMOSJournal of Semiconductors, 2010
- Improving Integrated Circuit Performance Through the Application of Hardness-by-Design MethodologyIEEE Transactions on Nuclear Science, 2008
- A new total-dose-induced parasitic effect in enclosed-geometry transistorsIEEE Transactions on Nuclear Science, 2005
- Radiation-induced edge effects in deep submicron CMOS transistorsIEEE Transactions on Nuclear Science, 2005
- Study of N-channel MOSFETs with an enclosed-gate layout in a 0.18 /spl mu/m CMOS technologyIEEE Transactions on Nuclear Science, 2005
- Application of hardness-by-design methodology to radiation-tolerant ASIC technologiesIEEE Transactions on Nuclear Science, 2000
- Aspect ratio calculation in n-channel MOSFETs with a gate-enclosed layoutSolid-State Electronics, 2000
- Layout techniques to enhance the radiation tolerance of standard CMOS technologies demonstrated on a pixel detector readout chipNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2000