Performance of ITER pressure gauges during deuterium operation in the large helical device
Open Access
- 21 November 2024
- journal article
- research article
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 66 (12) , 125017
Abstract
During deuterium campaigns on the heliotron large helical device (LHD), ITER pressure gauges with different cathode materials were used to measure the neutral pressure in the sub-divertor region. Throughout these campaigns, it was observed that the performance of a LaB6 cathode was unsatisfactory during deuterium operation. Conversely, measurements taken with pressure gauges with a ZrC cathode performed well throughout the deuterium pulses. The ITER pressure gauge with the ZrC cathode could be operated with a very high electron current of 800 µA, thus improving the lower detection limit of the neutral pressure in LHD. With this design it was also possible to avoid jumps in the ion current within strong magnetic fields, improving the accuracy of the measurement from 15% uncertainty to 5%. These features allowed very precise neutral pressure measurements to be made in a fusion device with magnetic confinement. The problems with the lifetime of the ZrC cathode reported in Mackel et al (2023 Fusion Eng. Des. 189 113439) were not relevant here, as the total runtime in the magnetic field was about 60 h, less than the expected lifetime of the cathode of 350 h.Keywords
Funding Information
- Fusion for Energy (F4E-FPA-364-SG06)
This publication has 15 references indexed in Scilit:
- Verification of lifetime and mechanical load aspects for ITER diagnostic pressure gauges based on ZrC emitterReview of Scientific Instruments, 2024
- Testing of ITER diagnostic pressure gauges in preparation of final design reviewFusion Engineering and Design, 2023
- Experimental investigation of current jumps in linear geometry hot cathode ionization gauges in strong magnetic fieldsFusion Engineering and Design, 2022
- Particle control in long-pulse discharge using divertor pumping in LHDPhysica Scripta, 2022
- On the stability of thoriated tungsten cathodes in strong magnetic fieldsReview of Scientific Instruments, 2021
- Performance of new crystal cathode pressure gauges for long-pulse operation in the Wendelstein 7-X stellaratorReview of Scientific Instruments, 2019
- An ionization pressure gauge with LaB6 emitter for long-term operation in strong magnetic fieldsReview of Scientific Instruments, 2018
- Status of the development of diagnostic pressure gauges for the operation in ITERFusion Engineering and Design, 2017
- In vessel pressure measurement in nuclear fusion experiments with asdex gaugesVacuum, 1998
- The Large Helical Device (LHD) helical divertorNuclear Fusion, 1994