Enhanced multi-environment corrosion resistance of HVOF-sprayed hydroxyapatite coatings on Ti-6Al-6Mo alloy for dental implants
- 27 August 2025
- journal article
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (9)
Abstract
Titanium dental implants require exceptional corrosion resistance in aggressive oral environments, where fluoride and antibiotics compromise long-term integrity. This study investigates a vanadium-free Ti-6Al-6Mo alloy coated with hydroxyapatite (HA) using high-velocity oxygen fuel (HVOF) spraying. Surface characterization using scanning electron microscopy and X-ray diffractometry confirmed a dense and adherent HA layer (Ca/P = 1.79) with favorable crystallinity. Electrochemical performance was evaluated in three different environments, namely artificial saliva (AS), AS with gentamicin (2 g/L), and AS with NaF (225 ppm F⁻) at 37 °C using potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The HA-coated Ti-6Al-6Mo samples show a lower contact angle than the base Ti-6Al-6Mo, which indicates the hydrophilic properties in AS, AS+gentamicin, and AS+NaF solutions. The HA-coated specimens exhibit significant enhanced corrosion resistance compared to the uncoated alloy: the corrosion current density (icorr) decreased from 3.68 to 0.18 µA/cm², while polarization resistance (Rp) increased from 41.7 to 2660 kΩ in the AS+gentamicin solution. Corrosion rates dropped by 70% across all media, with the lowest rate of 0.003 mm/year and highest Rp of 2660 kΩ observed for the HA-coated alloy in gentamicin-containing AS solution, indicating a synergistic protection. The HVOF-sprayed HA coating in Ti-6Al-6Mo alloy markedly improves electrochemical stability in diverse oral environments, supporting its application for long-lasting dental implants.Keywords
Funding Information
- Badan Riset dan Inovasi Nasional (RIIM LPDP-BRIN B-6952/III.10/KS.00.00/6/2022)
- Badan Riset dan Inovasi Nasional (RIIM LPDP-BRIN B-807/II.7.5/FR/6/2022)
This publication has 40 references indexed in Scilit:
- Impact of Hydroxyapatite Powder Particle Size on Mechanical and Electrochemical Properties of Flame-Sprayed Coatings for Titanium ImplantsJournal of Thermal Spray Technology, 2024
- A Review on High-Velocity Oxy-Fuel (HVOF) Coating TechniqueJournal of The Institution of Engineers (India): Series D, 2023
- Effects of Spraying Parameters on the Velocity of HVOF-Sprayed Particles Based on the PIV MethodJournal of Thermal Spray Technology, 2022
- HVOF Hydroxyapatite/Titania-Graded Coatings: Microstructural, Mechanical, and In Vitro CharacterizationJournal of Thermal Spray Technology, 2018
- A review on the wettability of dental implant surfaces II: Biological and clinical aspectsActa Biomaterialia, 2014
- Advances in Calcium Phosphate Biomaterials2014
- Influence of the substrate bias on the stoichiometry and structure of RF‐magnetron sputter‐deposited silver‐containing calcium phosphate coatingsMaterialwissenschaft und Werkstofftechnik, 2013
- Comparative corrosion study of Ti–Ta alloys for dental applicationsActa Biomaterialia, 2009
- How is wettability of titanium surfaces influenced by their preparation and storage conditions?Journal of Materials Science: Materials in Medicine, 2009
- Corrosive effects of fluoride on titanium: Investigation by X‐ray photoelectron spectroscopy, atomic force microscopy, and human epithelial cell culturingJournal of Biomedical Materials Research Part A, 2008