Effects of Co on Mechanical Properties and Precipitates in a Novel Secondary−Hardening Steel with Duplex Strengthening of M2C and β−NiAl
Open Access
Abstract
Synergistic strengthening of nano−scaled M2C and β−NiAl has become a new route to develop ultra−high secondary−hardening steel. At present, the effect of Co on the synergistic precipitation behavior of duplex phases of M2C and β−NiAl has been rarely reported. This paper revealed the effects of Co on the mechanical properties and duplex precipitates of M2C and β−NiAl in a novel 2.5 GPa ultra−high strength secondary−hardening steel. The tensile tests indicated that a 10% Co−alloy steel achieved a much stronger secondary−hardening effects compared to a Co−free steel during aging process, especially in the early−aging state. Needle−shaped M2C and spherical β−NiAl particles were observed in both Co−alloy and Co−free steels. However, the number density, and volume fraction of M2C were significantly enhanced in the 10% Co−alloy steel. The Mo contents in M2C carbide and α−Fe after aging treatment were both analyzed through experimental determination and thermodynamic calculation, and the results indicated that Co decreased the solubility of Mo in α−Fe, thus promoting the precipitation of Mo−rich carbides.Keywords
Funding Information
- National Key R&D Program of China (2022YFB3705200, S−23T60190B)
- Youth Program of CISRI Funding (2022YFB3705200, S−23T60190B)
This publication has 27 references indexed in Scilit:
- Concomitant Precipitation of Intermetallic β-NiAl and Carbides in a Precipitation Hardened SteelMetallurgical and Materials Transactions A, 2024
- Effects of solid-solution temperature on microstructure and mechanical properties of a novel 2000 MPa grade ultra-high-strength steelJournal of Iron and Steel Research International, 2020
- Precipitate evolution and strengthening behavior during aging process in a 2.5 GPa grade maraging steelActa Materialia, 2019
- A novel ultra-high strength maraging steel with balanced ductility and creep resistance achieved by nanoscale β-NiAl and Laves phase precipitatesActa Materialia, 2018
- The study on kinetics of static recrystallization in the two-stage isothermal compression of 300M steelComputational Materials Science, 2014
- Cementite-free martensitic steels: A new route to develop high strength/high toughness grades by modifying the conventional precipitation sequence during temperingActa Materialia, 2012
- Effect of alloying elements on fracture behavior of Fe-18Ni-2Ti-(8Co) alloysMetals and Materials, 1997
- Phase chemistry and precipitation reactions in maraging steels: Part I. Introduction and study of Co-containing C-300 steelMetallurgical Transactions A, 1993
- The effect of the precipitation of coherent and incoherent precipitates on the ductility and toughness of high-strength steelMetallurgical Transactions A, 1993
- Strength and toughness of Fe-10ni alloys containing C, Cr, Mo, and CoMetallurgical Transactions, 1973