Uniaxial Compression Mechanical Properties of Foam Nickel/Iron-Epoxy Interpenetrating Phase Composites
Open Access
Abstract
The damage process and failure mechanisms were analyzed by a series of quasi-static compressive experiments of seven materials including pure epoxy (EP), three different PPI (pores per linear inch) foam nickel-iron, and three different PPI foam nickel/iron-epoxy interpenetrating phase composites (IPC). Plotting the stress–strain curves of different materials, their change rules are discussed, then the effective elastic modulus and yield limit of the materials are provided, and the energy absorption properties of different materials are analyzed by the stress–strain curves. It was found that the effective elastic modulus and specific stiffness of the three IPC materials were higher than pure foam nickel-iron. The brittleness of epoxy can be obviously changed by selecting a suitable PPI foam nickel-iron composited with it. The unit volume energy absorption rate of foam nickel/iron-epoxy was significantly higher than pure epoxy and pure foam nickel-iron. It was also found that the energy absorption rate decreased with the increase in PPI. The stress relaxation rate decreased first and then increased with the increase in PPI. The creep behavior of the three composites was obvious in the creep elastic stage, and the creep rate increased with the increase in PPI. The creep rate decreased with the increase in PPI in the creep transition stage.Keywords
Funding Information
- Natural Science Foundation of Hebei Province (A2017203272)
This publication has 12 references indexed in Scilit:
- Detection and Quantification of Delamination Failures in Marine Composite Bulkheads via Vibration Energy VariationsSensors, 2021
- Enhanced interfacial properties of graphene oxide incorporated carbon fiber reinforced epoxy nanocomposite: a systematic thermal properties investigationJournal of Polymer Research, 2019
- The Effect of Polycaprolactone Nanofibers on the Dynamic and Impact Behavior of Glass Fibre Reinforced Polymer CompositesJournal of Composites Science, 2018
- Compressive behavior of a rolled open-cell aluminum foamMaterials Science and Engineering: A, 2018
- Numerical study of energy absorption in aluminum foam sandwich panel structures using drop hammer testJournal of Sandwich Structures & Materials, 2017
- Characterization of aluminum foam–polypropylene interpenetrating phase composites: Flexural test resultsMechanics of Materials, 2010
- Mechanical behaviour and energy absorption of closed-cell aluminium foam panels in uniaxial compressionMaterials Science and Engineering: A, 2009
- Processing, compression response and finite element modeling of syntactic foam based interpenetrating phase composite (IPC)Materials Science and Engineering: A, 2009
- Effect of fiber reinforcement on the tensile, fracture and thermal properties of syntactic foamPolymer, 2007
- On the mechanical properties of alumina–epoxy composites with an interpenetrating network structureMaterials Science and Engineering: A, 2005