Xiaoxing Wang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Xiaoxing Wang has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Huijian Li
School of Civil Engineering and Mechanics, Yanshan University, Qinhuangdao 066004, China
4 shared publications Jingli Li
School of Civil Engineering and Mechanics, Yanshan University , Qinhuangdao 066004, China
1 shared publication- Jingli Li
School of Civil Engineering and Mechanics, Yanshan University, Qinhuangdao 066004, China
1 shared publication - Jingli Li
School of Civil Engineering and Mechanics, Yanshan University , Qinhuangdao 066004, China
1 shared publication - Lixin Zhang
College of Urban Construction, Hebei Normal University of Science & Technology, Qinhuangdao 066004, China
1 shared publication - Xi Liang
The University of Chicago
1 shared publication
Latest Publications
- Open Access
A New Uniaxial Tensile Model for Foam Metal/Epoxy Interpenetrated Phase Composites
Foam metal/epoxy interpenetrating phase composite is a new type of composite material with interpenetrating continuity in composition, which exhibits different intrinsic relationships under different stress states in tension and compression, and it is necessary to study the intrinsic relationships in the tensile state in depth. A mesoscopic damage-based tensile intrinsic model is developed, and the elasto-plastic tensile intrinsic equations of the representative volume element are derived based on small deformation theory and total strain theory, as well as the assumptions of equal stress and equal strain. The tensile strengths of nickel–iron foam/epoxy interpenetrated phase composites in three different sizes and their constituent phases were measured, and it was shown in the results that the composite of three-dimensional network interpenetration with high-strength foam metal and epoxy resin formed a weak surface inside the material, and did not significantly improve the tensile strength of the composites. The tensile instantonal equations and damage instantonal equations of nickel–iron foam/epoxy interpenetrated phase composites were predicted by the method of inversion, and the applicability and high accuracy of the tensile intrinsic model were verified in comparison with the measured results.
Open AccessA New Uniaxial Tensile Model for Foam Metal/Epoxy Interpenetrated Phase Composites
Foam metal/epoxy interpenetrating phase composite is a new type of composite material with interpenetrating continuity in composition, which exhibits different intrinsic relationships under different stress states in tension and compression, and it is necessary to study the intrinsic relationships in the tensile state in depth. A mesoscopic damage-based tensile intrinsic model is developed, and the elasto-plastic tensile intrinsic equations of the representative volume element are derived based on small deformation theory and total strain theory, as well as the assumptions of equal stress and equal strain. The tensile strengths of nickel–iron foam/epoxy interpenetrated phase composites in three different sizes and their constituent phases were measured, and it was shown in the results that the composite of three-dimensional network interpenetration with high-strength foam metal and epoxy resin formed a weak surface inside the material, and did not significantly improve the tensile strength of the composites. The tensile instantonal equations and damage instantonal equations of nickel–iron foam/epoxy interpenetrated phase composites were predicted by the method of inversion, and the applicability and high accuracy of the tensile intrinsic model were verified in comparison with the measured results.
- Open Access
- 1 April 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (4) , 045301
Study on the shear performance of new type interpenetrating composite plate connector
A new kind of epoxy resin/foam nickel–iron plate connector is introduced. This kind of interpenetrating composite connector has approximate thermal insulation performance of the resin, good mechanical properties, and easy manufacture and production. This paper studied the shear performance of the connector at the elastic–plastic stage, which was the basis important performance of the connector to be widely used. Three groups of specimens made of single-layer foam nickel–iron plate and three groups of specimens made of double-layer foam nickel–iron plate were tested and analyzed by finite element simulation. The results showed that the plate connector had better shear strength. The failure mode of plate specimens was the typical bending shear failure, and finally, the web buckling occurred in the compression zone. The bearing capacity of the specimen was positively correlated with the thickness of the specimen and the material properties of the matrix phase.
- 1 April 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (4) , 045301
Open AccessStudy on the shear performance of new type interpenetrating composite plate connector
A new kind of epoxy resin/foam nickel–iron plate connector is introduced. This kind of interpenetrating composite connector has approximate thermal insulation performance of the resin, good mechanical properties, and easy manufacture and production. This paper studied the shear performance of the connector at the elastic–plastic stage, which was the basis important performance of the connector to be widely used. Three groups of specimens made of single-layer foam nickel–iron plate and three groups of specimens made of double-layer foam nickel–iron plate were tested and analyzed by finite element simulation. The results showed that the plate connector had better shear strength. The failure mode of plate specimens was the typical bending shear failure, and finally, the web buckling occurred in the compression zone. The bearing capacity of the specimen was positively correlated with the thickness of the specimen and the material properties of the matrix phase.
- Open Access
- 1 March 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (3) , 035051
Discussion of a new mechanical model for interpenetrating phase composites under compression considering constituent phase interactions
Interpenetrating phase composites (IPCs) are a new type of materials with designable mechanical properties. In this work, to explore a simple, applicable, and accurate method for property designability of interpenetrated phase composites, the interaction between the matrix phase and the reinforcing phase of IPC under compressive stress is discussed, and a microstructured representative volume element is proposed for interpenetrating metal/polymer composites under compressive loading by considering the interaction of constituent phases. The stress–strain relationship of the representative volume element is established based on the iso-stress and iso-strain assumptions. Compared with the experimental results with those of interpenetrated metal/polymer composites, interpenetrated metal/metal composites, and interpenetrated metal/ceramic composites, it is shown that the analytical solutions can accurately predict the elasto-plastic compressive stress–strain curves.
- 1 March 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (3) , 035051
Open AccessDiscussion of a new mechanical model for interpenetrating phase composites under compression considering constituent phase interactions
Interpenetrating phase composites (IPCs) are a new type of materials with designable mechanical properties. In this work, to explore a simple, applicable, and accurate method for property designability of interpenetrated phase composites, the interaction between the matrix phase and the reinforcing phase of IPC under compressive stress is discussed, and a microstructured representative volume element is proposed for interpenetrating metal/polymer composites under compressive loading by considering the interaction of constituent phases. The stress–strain relationship of the representative volume element is established based on the iso-stress and iso-strain assumptions. Compared with the experimental results with those of interpenetrated metal/polymer composites, interpenetrated metal/metal composites, and interpenetrated metal/ceramic composites, it is shown that the analytical solutions can accurately predict the elasto-plastic compressive stress–strain curves.
- Open Access
Uniaxial Compression Mechanical Properties of Foam Nickel/Iron-Epoxy Interpenetrating Phase Composites
The damage process and failure mechanisms were analyzed by a series of quasi-static compressive experiments of seven materials including pure epoxy (EP), three different PPI (pores per linear inch) foam nickel-iron, and three different PPI foam nickel/iron-epoxy interpenetrating phase composites (IPC). Plotting the stress–strain curves of different materials, their change rules are discussed, then the effective elastic modulus and yield limit of the materials are provided, and the energy absorption properties of different materials are analyzed by the stress–strain curves. It was found that the effective elastic modulus and specific stiffness of the three IPC materials were higher than pure foam nickel-iron. The brittleness of epoxy can be obviously changed by selecting a suitable PPI foam nickel-iron composited with it. The unit volume energy absorption rate of foam nickel/iron-epoxy was significantly higher than pure epoxy and pure foam nickel-iron. It was also found that the energy absorption rate decreased with the increase in PPI. The stress relaxation rate decreased first and then increased with the increase in PPI. The creep behavior of the three composites was obvious in the creep elastic stage, and the creep rate increased with the increase in PPI. The creep rate decreased with the increase in PPI in the creep transition stage.
Open AccessUniaxial Compression Mechanical Properties of Foam Nickel/Iron-Epoxy Interpenetrating Phase Composites
The damage process and failure mechanisms were analyzed by a series of quasi-static compressive experiments of seven materials including pure epoxy (EP), three different PPI (pores per linear inch) foam nickel-iron, and three different PPI foam nickel/iron-epoxy interpenetrating phase composites (IPC). Plotting the stress–strain curves of different materials, their change rules are discussed, then the effective elastic modulus and yield limit of the materials are provided, and the energy absorption properties of different materials are analyzed by the stress–strain curves. It was found that the effective elastic modulus and specific stiffness of the three IPC materials were higher than pure foam nickel-iron. The brittleness of epoxy can be obviously changed by selecting a suitable PPI foam nickel-iron composited with it. The unit volume energy absorption rate of foam nickel/iron-epoxy was significantly higher than pure epoxy and pure foam nickel-iron. It was also found that the energy absorption rate decreased with the increase in PPI. The stress relaxation rate decreased first and then increased with the increase in PPI. The creep behavior of the three composites was obvious in the creep elastic stage, and the creep rate increased with the increase in PPI. The creep rate decreased with the increase in PPI in the creep transition stage.