Tension and shear block failure of bolted gusset plates
Authors:
- Bino B.S HunsBHBino B.S Huns
- Gilbert Y GrondinGGGilbert Y Grondin
- Robert G DriverRDRobert G Driver
- 1 April 2006
- journal article
- research article
- Published by Canadian Science Publishing in Canadian Journal of Civil Engineering
- Vol. 33 (4) , 395-408
Abstract
Despite the large database of test results for tension and shear block failure in gusset plates, the exact progression of the failure mechanism is not clear. Although current design equations predict the capacity of gusset plates fairly well, it is important for a design equation to not only predict the capacity reliably but also reflect the failure mode accurately. Recent experimental and numerical research has indicated that current design equations do not always predict the failure behaviour accurately. A finite element model was therefore developed to predict the sequence of events that leads to the tear-out of a block of material from a bolted gusset plate in tension. The model was developed to provide a useful tool for studying tension and shear block failure in gusset plates and other structural elements. This paper presents the development of the finite element model and procedure for prediction of tension and shear block failure in gusset plates. Making use of the finite element model, the database of test results is also expanded to include gusset plates with a larger number of transverse lines of bolts than what has been obtained experimentally. A reliability analysis is used to assess several design equations, including the equation adopted in CAN/CSA-S16-01 and a unified equation proposed recently for several types of bolted connections. From this work, a limit states design equation is proposed for gusset plates.Key words: gusset plate, limit states design, reliability, shear rupture, tension rupture, finite element analysis, failure criterion.Keywords
This publication has 10 references indexed in Scilit:
- Review of resistance factor for steel: data collectionCanadian Journal of Civil Engineering, 2002
- AISC LRFD Rules for Block Shear in Bolted Connections—A ReviewEngineering Journal, 2001
- Bolted Steel Connections: Tests on T-Stub ComponentsJournal of Structural Engineering, 2000
- FAILURE MODES AND ULTIMATE TENSILE STRENGTH OF STEEL PLATES JOINTED WITH HIGH-STRENGTH BOLTSJournal of Structural and Construction Engineering (Transactions of AIJ), 1998
- Finite element studies for correlation with block shear testsComputers & Structures, 1996
- Limit states design of steel structures—performance factorsCanadian Journal of Civil Engineering, 1980
- An incremental approach to the solution of snapping and buckling problemsInternational Journal of Solids and Structures, 1979
- Load and Resistance Factor Design for SteelJournal of the Structural Division, 1978
- Load and Resistance Factor Design Criteria for ConnectorsJournal of the Structural Division, 1978
- Tests of Gusset Plate ModelsJournal of the Structural Division, 1971