Optimization of Grayscale Lithography for the Fabrication of Flat Diffractive Infrared Lenses on Silicon Wafers
Open Access
- 30 June 2024
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 15 (7) , 866
Abstract
Grayscale lithography (GSL) is an alternative approach to the standard binary lithography in MEMS fabrication, enabling the fabrication of complicated, arbitrary 3D structures on a wafer without the need for multiple masks and exposure steps. Despite its advantages, GSL’s effectiveness is highly dependent on controlled lab conditions, equipment consistency, and finely tuned photoresist (PR) exposure and etching processes. This works presents a thorough investigation of the challenges of GSL for silicon (Si) wafers and presents a detailed approach on how to minimize fabrication inaccuracies, aiming to replicate the intended design as closely as possible. Utilizing a maskless laser writer, all aspects of the GSL are analyzed, from photoresist exposure parameters to Si etching conditions. A practical application of GSL is demonstrated in the fabrication of 4-μm-deep #/1 Si Fresnel lenses for long-wave infrared (LWIR) imaging (8–12 μm). The surface topography of a Fresnel lens is a good case to apply GSL, as it has varying shapes and size features that need to be preserved. The final fabricated lens profiles show a good match with the initial design, and demonstrate successful etching of coarse and fine features, and demonstrative images taken with an LWIR camera.
Keywords
All Related Versions
Funding Information
- Norges Forskningsråd (327742, 295864)
- Norwegian Micro- and Nano-Fabrication Facility (327742, 295864)
This publication has 27 references indexed in Scilit:
- Combining thermal scanning probe lithography and dry etching for grayscale nanopattern amplificationMicrosystems & Nanoengineering, 2024
- Short‐Wave Infrared Chip‐Spectrometer by Using Laser Direct‐Writing Grayscale LithographyAdvanced Optical Materials, 2022
- Grayscale-to-Color: Scalable Fabrication of Custom Multispectral Filter ArraysACS Photonics, 2019
- Generation of Customizable Micro-wavy Pattern through Grayscale Direct Image LithographyScientific Reports, 2016
- Fine-tuned grayscale optofluidic maskless lithography for three-dimensional freeform shape microstructure fabricationOptics Letters, 2014
- Large Area IR Microlens Arrays of Chalcogenide Glass Photoresists by Grayscale Maskless LithographyACS Applied Materials & Interfaces, 2013
- Laser lithographic approach to micro-optical freeform elements with extremely large sag heights.Optics Express, 2012
- Design, fabrication, and characterization of circular Dammann gratings based on grayscale lithographyOptics Letters, 2010
- Gray-scale photolithography using microfluidic photomasksProceedings of the National Academy of Sciences, 2003
- Photoresist characterization and linearization procedure for the gray-scale fabrication of diffractive optical elementsApplied Optics, 2001