Mechanical properties of teak wood flour‐reinforced HDPE composites
Authors:
- 11 February 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 112 (3) , 1826-1834
Abstract
Mechanical properties such as tensile and impact strength behavior of teak wood flour (TWF)‐filled high‐density polyethylene (HDPE) composites were evaluated at 0–0.32 volume fraction (Φf) of TWF. Tensile modulus and strength initially increased up to Φf = 0.09, whereas a decrease is observed with further increase in the Φf. Elongation‐at‐break and Izod impact strength decreased significantly with increase in the Φf. The crystallinity of HDPE also decreased with increase in the TWF concentration. The initial increase in the tensile modulus and strength was attributed to the mechanical restraint, whereas decrease in the tensile properties at Φf > 0.09 was due to the predominant effect of decrease in the crystallinity of HDPE. The mechanical restraint decreased the elongation and Izod impact strength. In the presence of coupling agent, maleic anhydride‐grafted HDPE (HDPE‐g‐MAH), the tensile modulus and strength enhanced significantly because of enhanced interphase adhesion. However, the elongation and Izod impact strength decreased because of enhanced mechanical restraint on account of increased phase interactions. Scanning electron microscopy showed a degree of better dispersion of TWF particles because of enhanced phase adhesion in the presence of HDPE‐g‐MAH. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 33 references indexed in Scilit:
- Effect of different compatibilizing agents on the mechanical properties of lignocellulosic material filled polyethylene bio-compositesComposite Structures, 2007
- Mechanical properties of HDPE/bark flour compositesJournal of Applied Polymer Science, 2007
- Physico-mechanical Properties of Paper Sludge-Thermoplastic Polymer CompositesJournal of Thermoplastic Composite Materials, 2004
- Surface characterization of esterified cellulosic fibers by XPS and FTIR SpectroscopyWood Science and Technology, 2001
- Composites reinforced with cellulose based fibresProgress in Polymer Science, 1999
- Wood-filled thermoplastic compositesMechanics of Composite Materials, 1998
- Toughened Plastics I1993
- Mechanical behaviour of bamboo and bamboo compositeJournal of Materials Science, 1992
- Surface tension and mechanical properties in polyolefin compositesMakromolekulare Chemie. Macromolecular Symposia, 1989
- Polymer Blends and Composites1976