Flow Behavior and Hot Processing Map of GH4698 for Isothermal Compression Process
Open Access
Abstract
An in-depth understanding of the flow behaviors of materials deformed at high temperatures is of paramount significance. However, insufficient research on the nickel-based GH4698 alloy has resulted in inaccurate material flow prediction or even cracking in the practical billet opening of GH4698 large forgings. In this study, hot compressions were performed at 950–1150 °C and 0.001–3 s−1. Single-peaked strain-stress curves were obtained under various conditions, owing to dislocation motions in dynamic recrystallizations. The Arrhenius model was formulated to accurately describe the flow stress evolutions and the mean prediction error of the flow stress was 5.90%. Processing maps were constructed at various hot working conditions. It was found that the hot working ability of GH4698 markedly decreased under lower temperatures (950–1080 °C) and higher strain rates (0.1–3 s−1). Optimal thermal processing parameters were suggested. In sum, this study systematically investigated the flow behaviors and hot working ability of GH4698 in isothermal compressions.Keywords
This publication has 24 references indexed in Scilit:
- Hot deformation characteristics and processing map analysis for Nickel-based corrosion resistant alloyJournal of Alloys and Compounds, 2015
- Hot compression deformation and constitutive modeling of GH4698 alloyMaterials & Design (1980-2015), 2015
- The high temperature flow behavior modeling of NiTi shape memory alloy employing phenomenological and physical based constitutive models: A comparative studyIntermetallics, 2014
- Hot Deformation Behavior and Processing Map of a Nickel-Base Superalloy GH4169Advanced Materials Research, 2013
- Constitutive modeling for flow behavior of GCr15 steel under hot compression experimentsMaterials & Design (1980-2015), 2013
- Flow instability criteria in processing map of superalloy GH79Transactions of Nonferrous Metals Society of China, 2012
- On the development of instability criteria during hotworking with reference to IN 718Materials Science and Engineering: A, 1998
- Modelling of hot deformation for microstructural controlInternational Materials Reviews, 1998
- Using material behavior models to develop process control strategiesJOM, 1992
- Modeling of dynamic material behavior in hot deformation: Forging of Ti-6242Metallurgical Transactions A, 1984