Composite Mechanical Properties of Coils Made With Nickel-Alloy Laminated Bi-2223 Conductors
- 30 January 2020
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 30 (4) , 1-4
Abstract
High-temperature superconducting magnet coils made with Sumitomo Type HT-NX are complex composite structures composed of Bi-2223 conductor filaments, silver matrix, solder, nickel-alloy laminations, polymer insulation, and epoxy or wax. The mechanical properties of these composites are required inputs to a correct stress analysis. Measurements of the desired properties are performed on representative model test specimens. Mechanical test specimens composed of several layers of insulated conductor are prepared by cutting to length, stacking and epoxy impregnation. Mechanical tests are performed in liquid nitrogen and liquid helium. Elastic constants are found from tensile strain measurements in the conductor longitudinal, or coil hoop, direction and from compressive strain measurements in the conductor transverse, or coil radial and axial directions.Keywords
Funding Information
- NSF (DMR-1644779)
- State of Florida
This publication has 9 references indexed in Scilit:
- A feasibility study of high-strength Bi-2223 conductor for high-field solenoidsSuperconductor Science and Technology, 2017
- Comparison of Electromechanical Properties and Lattice Distortions of Different Cuprate High-Temperature SuperconductorsIEEE Transactions on Applied Superconductivity, 2016
- Electrical and Mechanical Properties of DI-BSCCO Type HT Reinforced With Metallic SheathesIEEE Transactions on Applied Superconductivity, 2009
- Mechanical behavior and strain dependence of the critical current of DI-BSCCO tapesSuperconductor Science and Technology, 2008
- Experimental Techniques for Low-Temperature Measurements2006
- Analysis of stress–strain behavior in Bi2223 composite tapesPhysica C: Superconductivity and its Applications, 2004
- Mechanical properties of Bi2223 filaments extracted from multifilamentary tape evaluated by the single-fibre tensile testSuperconductor Science and Technology, 2003
- Mechanical properties of epoxy impregnated superconducting solenoidsIEEE Transactions on Magnetics, 1996
- Measurement of the Elastic Modulus of Kapton Perpendicular to the Plane of the Film at Room and Cryogenic Temperatures1992