Multifunctional laminated polyethylene films with calcium carbonate and essential oil additives for food packaging applications
- 17 September 2026
- journal article
- research article
- Published by SAGE Publications in Journal of Plastic Film & Sheeting
Abstract
Multifunctional polymer film development has attracted increasing interest for food packaging applications by integrating barrier, mechanical, and antimicrobial functions into a single structure. This study developed multilayer polyethylene films by combining a calcium carbonate-filled polyethylene film and a polyethylene film containing a blend of clove and rosemary essential oils, using a polyurethane adhesive layer to assemble the multilayer structure. Two calcium carbonate sources, commercial calcium carbonate and eggshell-derived calcium carbonate, were evaluated. The polyethylene films, based on a blend of high-density polyethylene and low-density polyethylene, were produced by twin-screw extrusion followed by blown film extrusion, while the essential oils (2.0 wt%) were incorporated during a subsequent single-screw extrusion step. The films were characterized in terms of morphology, chemical structure, surface properties, thermal behavior, mechanical performance, oxygen permeability, and antimicrobial activity. The multilayer structure exhibited good interfacial integrity while maintaining the thermal stability of the polyethylene matrix. Compared with neat polyethylene, films containing 0.5 wt% commercial calcium carbonate showed a 27% increase in tensile strength and a 23% increase in Young’s modulus, whereas films containing 0.5 wt% eggshell-derived calcium carbonate exhibited a 26% reduction in oxygen permeability.These improvements were further correlated with changes in crystallinity, as revealed by differential scanning calorimetry analysis. The essential oil blend imparted antimicrobial activity, achieving a 96.85% reduction against Salmonella enterica serovar Typhimurium . These results demonstrate the potential of the proposed multilayer polyethylene system for active food packaging applications.Keywords
This publication has 54 references indexed in Scilit:
- Α coherent optimization course of the silicon nitride nanofiller load in medical grade isotactic polypropylene for material extrusion additive manufacturing: Rheology, engineering response, and cost-effectivenessColloid and Polymer Science, 2024
- Construction of Mineralization Nanostructures in Polymers for Mechanical Enhancement and FunctionalizationSmall, 2024
- Various polymorphs of calcium carbonate and poly(ethylene) glycol as thermal energy storage materialsJournal of Applied Polymer Science, 2023
- Calcium carbonate from chicken eggshells as filler in composite Nafion membrane for direct ethanol fuel cell: a molecular dynamics studyJournal of Chemical Technology & Biotechnology, 2023
- The effect of secondary nanofiller on mechanical properties and formulation optimization of HDPE /nanoclay/ nanoCaCO 3 hybrid nanocomposites using response surface methodologyJournal of Vinyl and Additive Technology, 2020
- Self‐healing waterborne polyurethane coating by pH‐dependent triggered‐release mechanismJournal of Applied Polymer Science, 2018
- Effect of clay and clay/essential oil in packaging filmsPolymer Composites, 2017
- Determination of the crystallinity of polyethylene/α‐olefin copolymers by thermal analysis: Relationship of the heat of fusion of 100% polyethylene crystal and the densityJournal of Polymer Science Part B: Polymer Physics, 2002
- Crystallization of low-density polyethylene- and linear low-density polyethylene-rich blendsJournal of Applied Polymer Science, 2000
- Performance of multilayer films using maleated linear low‐density polyethylene blendsPolymer Engineering & Science, 1998