One‐step anchored polymers via phenolamine bionic design on textile‐based heater for application in personal heat management
Authors:
- 15 December 2021
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (17) , 52021
Abstract
Flexible electronic fabrics urgently need to solve the problem of adhesion between the conductive layer and the fabric substrates. Inspired by phenamine bionics, we designed and fabricated copper nanoparticle conductive network/nylon 6 woven fabric (CNNs/NWF) wearable heaters through rapid co‐deposited of tannic acid and polyethyleneimine (PEI) by using CuSO4/H2O2 as a trigger. The grafted TA/PEI interface is capable of anchoring on the fabric surface via covalent and non‐covalent bonds on the one hand and providing an ideal platform to absorb and reduce catalyst Ag+ to facilitate subsequent electroless deposition on the other. Furthermore, the electrical heater could rise temperature from 14.6 to 152.6°C within 90 s under 1.5 V voltage, better than that of recently reported literature. The heater had a splendid conductivity (sheet resistance R0 ≈ 0.0086 Ω sq−1) and remain stable after 1000 bending cycle tests (normalized resistance R/R0 ≈ 2.5). Furthermore, the heater could meet 50 standard washing tests, satisfying the essential needs of the wearable devices. The deviation between the simulated data and the measured data was no more than 10% by the simulation of the finite elemental analysis. This study might provide a viable source for wearable heating devices.Keywords
This publication has 43 references indexed in Scilit:
- Cu Microbelt Network Embedded in Colorless Polyimide Substrate: Flexible Heater Platform with High Optical Transparency and Superior Mechanical StabilityACS Applied Materials & Interfaces, 2017
- Weft‐Knitted Fabric for a Highly Stretchable and Low‐Voltage Wearable HeaterAdvanced Electronic Materials, 2017
- High flux electroneutral loose nanofiltration membranes based on rapid deposition of polydopamine/polyethyleneimineJournal of Materials Chemistry A, 2017
- Glycerol/PEDOT:PSS coated woven fabric as a flexible heating element on textilesJournal of Materials Chemistry C, 2017
- Flexible carbon nanotube/polyurethane electrothermal filmsCarbon, 2016
- Smart Electronic TextilesAngewandte Chemie International Edition, 2016
- A novel Ag catalyzation process using swelling impregnation method for electroless Ni deposition on Kevlar® fiberApplied Surface Science, 2015
- Nylon-6/Graphene composites modified through polymeric modification of grapheneComposites Part B: Engineering, 2015
- Matrix‐Assisted Catalytic Printing for the Fabrication of Multiscale, Flexible, Foldable, and Stretchable Metal ConductorsAdvanced Materials, 2013
- Programming nanostructures of polymer brushes by dip-pen nanodisplacement lithography (DNL)Nanoscale, 2010