Study on Ignition Characteristics of Microwave Radiation Ignitor
Open Access
Abstract
This study explored methods used to improve the ignition efficiency of a microwave radiation igniter; experimental analyses were conducted to characterize the device’s performance in a model combustion chamber. High-speed imaging combined with an image intensifier tracked flame kernel formation and propagation dynamics under varying airflow rates, residual gas coefficients, and microwave pulse parameters. The results demonstrate that increased airflow rates reduced the relative decline in ignition delay time under microwave application, with the flame area growth curve exhibiting a steeper slope compared to non-microwave conditions. Elevated residual gas coefficients enhanced the microwave-induced reduction in ignition delay time, though this effect weakened significantly in fuel-rich environments. Additionally, higher microwave pulse frequencies and peak power levels both contributed to shorter ignition delay times; the delay decreased linearly with the rising pulse frequency and followed a power-dependent reduction trend. These findings systematically quantify the synergistic effects of flow dynamics, residual gases, and microwave parameters on ignition performance.Keywords
Funding Information
- Natural Science Basic Research Plan in Shaanxi Province of China (2020JM-349)
This publication has 8 references indexed in Scilit:
- Experimental study of microwave assisted spark ignition on expanding C2H2-Air spherical flamesCombustion and Flame, 2020
- Strengthening effect of microwave on spark ignited spherical expanding flames of methane-air mixtureEnergy Conversion and Management, 2020
- Flame size measurements of premixed propane-air mixtures ignited by microwave-enhanced plasmaProceedings of the Combustion Institute, 2017
- Microwave-assisted plasma ignition in a constant volume combustion chamberCombustion and Flame, 2016
- Enhancement of flame development by microwave-assisted spark ignition in constant volume combustion chamberCombustion and Flame, 2013
- Thermal Cracking of Hydrocarbon Aviation Fuels in Regenerative Cooling MicrochannelsEnergy & Fuels, 2013
- Large eddy simulation of laser ignition and compressible reacting flow in a rocket-like configurationCombustion and Flame, 2009
- Microwave Enhanced Ignition Process for Fuel Mixture at Elevated Pressure of 1MPa2009