Effect of graphene nanoplatelets and nano zinc oxide on gas barrier and antibacterial properties of thermoplastic nanocomposites
Authors:
- 12 June 2024
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (9) , 4181-4195
Abstract
Graphene‐loaded thermoplastic nanocomposite films must be evaluated for antibacterial activity, mechanical, and barrier properties before being utilized as food packaging. Herein, economically feasible linear low‐density polyethylene (LLDPE)‐based flexible packaging materials were developed via the melt compounding technique at 170°C temperature by taking advantage of both graphene nanoplatelets (GNP) and nano zinc oxide (ZnO) fillers. Morphological studies reveal that in composites loaded with GNP/ZnO hybrid fillers, ZnO nanoparticles form a network‐like structure throughout the polymer matrix. Simultaneously, GNPs are uniformly dispersed. The inclusion of hybrid nanofiller considerably reduces both the oxygen transmission rate and the water vapor transmission rate (WVTR) in LLDPE nanocomposites. A maximum decrease of 36% and 67%, respectively, in both oxygen transmission rate and WVTR is observed for 3 wt% of hybrid filler loading in a thermoplastic matrix containing 1 wt% of nano ZnO. The antibacterial efficacy of the derived nanocomposite films is obvious against gram‐positive (Bacillus subtilis) and gram‐negative (Escherichia coli) bacterial strains. These nanocomposite films have the potential to be successfully utilized as flexible packaging materials owing to their improved thermal, barrier, and antibacterial effectiveness.Highlights: GNP/ZnO was used as a hybrid reinforcing filler in the LLDPE matrix. ZnO nanoparticles establish a network‐like morphology. LLDPE nanocomposite films exhibited excellent antibacterial activity. Oxygen and water vapor barrier properties were significantly improved. The thermoplastic composite films could be used as food packaging materials.Keywords
This publication has 42 references indexed in Scilit:
- Effects of tire‐derived pyrolytic carbon black and pyrolytic heavy oil on the curing and mechanical properties of styrene‐butadiene rubber compositesPolymer Engineering & Science, 2023
- Bionanocomposites films applied as active and smart food packaging: A reviewPolymer Engineering & Science, 2023
- Improved rheological, barrier, antibacterial, and electromagnetic interference shielding properties of graphene and graphene derivatives based linear low density polyethylene nanocompositesPolymer Composites, 2023
- Enhanced mechanical and thermal properties of graphene nanoplatelets‐reinforced polyamide11/poly(lactic acid) nanocompositesPolymer Engineering & Science, 2022
- Enhancement of thermal, morphological, and mechanical properties of compatibilized based onPA6‐enriched graphene oxide/EPDM‐g‐MA/CR: Graphene oxide andEPDM‐g‐MAcompatibilizer roleJournal of Applied Polymer Science, 2020
- Evaluation of nanocomposites containing graphene nanoplatelets: Mechanical properties and combustion behaviorPolymer Engineering & Science, 2019
- Synthesis and antimicrobial activity of zinc oxide nanoparticles against foodborne pathogens Salmonella typhimurium and Staphylococcus aureusBiocatalysis and Agricultural Biotechnology, 2019
- Mass‐produced graphene—HDPE nanocomposites: Thermal, rheological, electrical, and mechanical propertiesPolymer Engineering & Science, 2018
- Poly(lactic acid)/graphene oxide–ZnO nanocomposite films with good mechanical, dynamic mechanical, anti‐UV and antibacterial propertiesJournal of Chemical Technology & Biotechnology, 2014
- Effects of particle size and electrical resistivity of filler on mechanical, electrical, and thermal properties of linear low density polyethylene–zinc oxide compositesJournal of Applied Polymer Science, 2013