Sangit Paul
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Sangit Paul has a total of 19 co-authors. Here are the top co-authors by number of shared publications:
Ankur Katheria
Rubber Technology Centre Indian Institute of Technology, Kharagpur Kharagpur India
5 shared publications- Narayan Chandra Das
Rubber Technology Centre Indian Institute of Technology Kharagpur India
5 shared publications Suman Kumar Ghosh
Rubber Technology Centre Indian Institute of Technology, Kharagpur Kharagpur India
5 shared publicationsPalash Das
4 shared publicationsJasomati Nayak
3 shared publicationsTrisita Ghosh
Rubber Technology Centre Indian Institute of Technology Kharagpur West Bengal India
3 shared publications
Latest Publications
- Open Access
- 24 February 2025
- Published by Wiley in SPE Polymers
- Vol. 6 (2)
Rubber compounds from pilot‐scale supercritical carbon dioxide assisted devulcanized rubber: Curing characteristics, mechanical and thermal properties
Recycling scrap tires is currently the most significant approach for promoting environmentally friendly production and consumption on an industrial scale. The cross‐linked sulfur bonds in scrap tires are broken during the devulcanization process. According to most of the literature, laboratory‐scale types of equipment were utilized for the studies on supercritical carbon dioxide (scCO2) for devulcanizing scrap tires. However, significant pilot‐scale research and a thorough examination of product reusability are essential to be broadly embraced as a feasible alternative for commercial application. Pilot‐scale supercritical fluid extraction equipment was used in this study to devulcanize crumb rubber obtained from discarded tires. The devulcanization treatment involved utilizing scCO2 and diphenyl disulfide (a decrosslinking agent). The trial adopted optimum process conditions achieved by the Taguchi‐DEAR design of experiments approach to generate devulcanized rubber. The devulcanized rubber is then re‐vulcanized with varying sulfur concentrations ranging from 1 to 2.5 phr. The re‐vulcanized rubber composites are examined by tensile test, dynamic mechanical analyzer, thermogravimetry analysis, and differential scanning calorimetry analysis. Morphology and surface roughness of composites are assessed through field emission scanning electron microscope and atomic force microscope, respectively. The optimal sulfur dose for re‐vulcanization is determined to be 1.5 phr depending on the curing, mechanical, and thermal characteristics of the composites. The lower crosslink density of the re‐vulcanized composites signifies that all crosslink sites are not accessible during the re‐vulcanization process, which can be addressed by employing other curing techniques. At the end, the study investigated the probable devulcanization and re‐vulcanization reaction mechanism.Highlights: Thermochemical devulcanization of the waste tire in a pilot‐scale setup. Utilization of CO2 as a supercritical solvent and diphenyl disulfide as a decrosslinking reagent. Vulcanization of devulcanized rubber using sulfur accelerator curing system. Morphological, mechanical, and thermal properties assessed of rubber composites.
- 24 February 2025
- Published by Wiley in SPE Polymers
- Vol. 6 (2)
Open AccessRubber compounds from pilot‐scale supercritical carbon dioxide assisted devulcanized rubber: Curing characteristics, mechanical and thermal properties
Recycling scrap tires is currently the most significant approach for promoting environmentally friendly production and consumption on an industrial scale. The cross‐linked sulfur bonds in scrap tires are broken during the devulcanization process. According to most of the literature, laboratory‐scale types of equipment were utilized for the studies on supercritical carbon dioxide (scCO2) for devulcanizing scrap tires. However, significant pilot‐scale research and a thorough examination of product reusability are essential to be broadly embraced as a feasible alternative for commercial application. Pilot‐scale supercritical fluid extraction equipment was used in this study to devulcanize crumb rubber obtained from discarded tires. The devulcanization treatment involved utilizing scCO2 and diphenyl disulfide (a decrosslinking agent). The trial adopted optimum process conditions achieved by the Taguchi‐DEAR design of experiments approach to generate devulcanized rubber. The devulcanized rubber is then re‐vulcanized with varying sulfur concentrations ranging from 1 to 2.5 phr. The re‐vulcanized rubber composites are examined by tensile test, dynamic mechanical analyzer, thermogravimetry analysis, and differential scanning calorimetry analysis. Morphology and surface roughness of composites are assessed through field emission scanning electron microscope and atomic force microscope, respectively. The optimal sulfur dose for re‐vulcanization is determined to be 1.5 phr depending on the curing, mechanical, and thermal characteristics of the composites. The lower crosslink density of the re‐vulcanized composites signifies that all crosslink sites are not accessible during the re‐vulcanization process, which can be addressed by employing other curing techniques. At the end, the study investigated the probable devulcanization and re‐vulcanization reaction mechanism.Highlights: Thermochemical devulcanization of the waste tire in a pilot‐scale setup. Utilization of CO2 as a supercritical solvent and diphenyl disulfide as a decrosslinking reagent. Vulcanization of devulcanized rubber using sulfur accelerator curing system. Morphological, mechanical, and thermal properties assessed of rubber composites.
- 12 June 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (9) , 4181-4195
Effect of graphene nanoplatelets and nano zinc oxide on gas barrier and antibacterial properties of thermoplastic nanocomposites
Graphene‐loaded thermoplastic nanocomposite films must be evaluated for antibacterial activity, mechanical, and barrier properties before being utilized as food packaging. Herein, economically feasible linear low‐density polyethylene (LLDPE)‐based flexible packaging materials were developed via the melt compounding technique at 170°C temperature by taking advantage of both graphene nanoplatelets (GNP) and nano zinc oxide (ZnO) fillers. Morphological studies reveal that in composites loaded with GNP/ZnO hybrid fillers, ZnO nanoparticles form a network‐like structure throughout the polymer matrix. Simultaneously, GNPs are uniformly dispersed. The inclusion of hybrid nanofiller considerably reduces both the oxygen transmission rate and the water vapor transmission rate (WVTR) in LLDPE nanocomposites. A maximum decrease of 36% and 67%, respectively, in both oxygen transmission rate and WVTR is observed for 3 wt% of hybrid filler loading in a thermoplastic matrix containing 1 wt% of nano ZnO. The antibacterial efficacy of the derived nanocomposite films is obvious against gram‐positive (Bacillus subtilis) and gram‐negative (Escherichia coli) bacterial strains. These nanocomposite films have the potential to be successfully utilized as flexible packaging materials owing to their improved thermal, barrier, and antibacterial effectiveness.Highlights: GNP/ZnO was used as a hybrid reinforcing filler in the LLDPE matrix. ZnO nanoparticles establish a network‐like morphology. LLDPE nanocomposite films exhibited excellent antibacterial activity. Oxygen and water vapor barrier properties were significantly improved. The thermoplastic composite films could be used as food packaging materials.
- 12 June 2024
- Published by Wiley in Polymer Engineering & Science
- Vol. 64 (9) , 4181-4195
Effect of graphene nanoplatelets and nano zinc oxide on gas barrier and antibacterial properties of thermoplastic nanocomposites
Graphene‐loaded thermoplastic nanocomposite films must be evaluated for antibacterial activity, mechanical, and barrier properties before being utilized as food packaging. Herein, economically feasible linear low‐density polyethylene (LLDPE)‐based flexible packaging materials were developed via the melt compounding technique at 170°C temperature by taking advantage of both graphene nanoplatelets (GNP) and nano zinc oxide (ZnO) fillers. Morphological studies reveal that in composites loaded with GNP/ZnO hybrid fillers, ZnO nanoparticles form a network‐like structure throughout the polymer matrix. Simultaneously, GNPs are uniformly dispersed. The inclusion of hybrid nanofiller considerably reduces both the oxygen transmission rate and the water vapor transmission rate (WVTR) in LLDPE nanocomposites. A maximum decrease of 36% and 67%, respectively, in both oxygen transmission rate and WVTR is observed for 3 wt% of hybrid filler loading in a thermoplastic matrix containing 1 wt% of nano ZnO. The antibacterial efficacy of the derived nanocomposite films is obvious against gram‐positive (Bacillus subtilis) and gram‐negative (Escherichia coli) bacterial strains. These nanocomposite films have the potential to be successfully utilized as flexible packaging materials owing to their improved thermal, barrier, and antibacterial effectiveness.Highlights: GNP/ZnO was used as a hybrid reinforcing filler in the LLDPE matrix. ZnO nanoparticles establish a network‐like morphology. LLDPE nanocomposite films exhibited excellent antibacterial activity. Oxygen and water vapor barrier properties were significantly improved. The thermoplastic composite films could be used as food packaging materials.
- 29 November 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 976, 173011
Stretchable and lightweight 2D MXene-based elastomeric composite foam for suppressing electromagnetic interference
- 29 November 2023
- Published by Elsevier in Journal of Alloys and Compounds
- Vol. 976, 173011
Stretchable and lightweight 2D MXene-based elastomeric composite foam for suppressing electromagnetic interference
- 25 July 2023
- Published by Wiley in Polymer Engineering & Science
- Vol. 63 (9) , 2942-2957
Effects of tire‐derived pyrolytic carbon black and pyrolytic heavy oil on the curing and mechanical properties of styrene‐butadiene rubber composites
To investigate the potential effect of the pyrolytic carbon black (CBp) and pyrolytic heavy oil (HO), we incorporated them into styrene‐butadiene rubber (SBR) as reinforcing filler and plasticizing agent, respectively. Since the industrial N330 CB's specific surface area and other specifications adhere to the CBp standard, it has been selected as a benchmark. To test HO's applicability, conventional (AO) was substituted with it. We experimented with the N330 and CBp in the 1/1 variant. We examined the impacts on the cure behavior, physical characteristics such as density and hardness, mechanical properties, abrasion resistance, dynamic mechanical performance, and thermal properties of the filled SBR composites. According to field emission (FESEM) and transmission electron microscopy (TEM) micrographs, the increased tensile and tear strength is due to N330 black's superior dispersion over CBp in the rubber matrix. Better dispersion in N330 type CB is also justified by lower tan δmax from the dynamic mechanical analysis (DMA) study. Utilizing HO changes the curing conditions since it comprises more sulfur, which accelerates the formation of sulfur–sulfur cross‐links. Increased tensile and tear strengths, as well as improved dispersion in the rubber matrix, have been seen with the combined use of N330 and CBp. Meanwhile, HO could function well in place of commercially available AOs.Highlights: The impact of scrap tires on human health and the environment is explored. Recovered carbon black (CB) from waste tire mixed with styrene‐butadiene rubber in various ratios. Pyrolytic oil is also incorporated to check its reusability in tire formulation. Similar cure characteristics and mechanical strength were found in the composites. Replacement of the conventional CB is proposed with recovered black.
- 25 July 2023
- Published by Wiley in Polymer Engineering & Science
- Vol. 63 (9) , 2942-2957
Effects of tire‐derived pyrolytic carbon black and pyrolytic heavy oil on the curing and mechanical properties of styrene‐butadiene rubber composites
To investigate the potential effect of the pyrolytic carbon black (CBp) and pyrolytic heavy oil (HO), we incorporated them into styrene‐butadiene rubber (SBR) as reinforcing filler and plasticizing agent, respectively. Since the industrial N330 CB's specific surface area and other specifications adhere to the CBp standard, it has been selected as a benchmark. To test HO's applicability, conventional (AO) was substituted with it. We experimented with the N330 and CBp in the 1/1 variant. We examined the impacts on the cure behavior, physical characteristics such as density and hardness, mechanical properties, abrasion resistance, dynamic mechanical performance, and thermal properties of the filled SBR composites. According to field emission (FESEM) and transmission electron microscopy (TEM) micrographs, the increased tensile and tear strength is due to N330 black's superior dispersion over CBp in the rubber matrix. Better dispersion in N330 type CB is also justified by lower tan δmax from the dynamic mechanical analysis (DMA) study. Utilizing HO changes the curing conditions since it comprises more sulfur, which accelerates the formation of sulfur–sulfur cross‐links. Increased tensile and tear strengths, as well as improved dispersion in the rubber matrix, have been seen with the combined use of N330 and CBp. Meanwhile, HO could function well in place of commercially available AOs.Highlights: The impact of scrap tires on human health and the environment is explored. Recovered carbon black (CB) from waste tire mixed with styrene‐butadiene rubber in various ratios. Pyrolytic oil is also incorporated to check its reusability in tire formulation. Similar cure characteristics and mechanical strength were found in the composites. Replacement of the conventional CB is proposed with recovered black.
- Open Access
- 11 May 2023
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 15
Combination effect of functionalized high aspect ratio carbonaceous nanofillers and carbon black on electrical, thermal conductivity, dielectric and EMI shielding behavior of co-continuous thermoplastic elastomeric blend composite films
- 11 May 2023
- Published by Elsevier in Chemical Engineering Journal Advances
- Vol. 15
Open AccessCombination effect of functionalized high aspect ratio carbonaceous nanofillers and carbon black on electrical, thermal conductivity, dielectric and EMI shielding behavior of co-continuous thermoplastic elastomeric blend composite films