Multi-Parameter Analysis of PCM-Based Thermal Management Performance and Thermophysical Characteristics of Lithium-Ion Battery Packs
Open Access
Abstract
A three-dimensional structural model of a cylindrical lithium-ion battery pack incorporating composite phase change material (PCM) is developed in this study, and numerical simulations are conducted using CFD software to investigate the heat dissipation characteristics of the battery pack. The results show that the composite PCM effectively suppresses the temperature rise within the battery pack, maintaining both the temperature and the temperature difference in the battery pack within acceptable ranges. Parameter analysis reveals that increasing the radial thermal conductivity of the battery reduces the heating rate and improves the temperature uniformity of the overall system. Within the investigated parameter range, increasing the thermal conductivity of the composite PCM beyond approximately 1 W/(m·K) results in a region of diminishing improvement in thermal performance. Beyond this range, further increases in thermal conductivity result in only marginal reductions in the maximum temperature, indicating that excessive enhancement of thermal conductivity provides limited thermal benefits and should be balanced with latent heat capacity. An increase in the latent heat of the composite PCM lowers both the maximum temperature and the maximum temperature difference at the end of discharge, thereby enhancing system temperature uniformity. Conversely, enlarging the external air convection heat transfer coefficient yields a limited cooling effect while deteriorating the temperature uniformity within the system. Therefore, on the principle of fully utilizing latent heat and minimizing energy consumption, the external convection heat transfer coefficient should be set as low as possible. This study provides theoretical guidance for the parametric design of PCM-based thermal management systems.Keywords
Funding Information
- Guizhou Provincial Major Scientific and Technological Program (XKBF (2025) 031)
- Guizhou Science and Technology Innovation Leading Talent Workstation (KXJZ (2025) 024)
- Guizhou Provincial Basic Research Program (MS [2025] 189)
- Guizhou Provincial Basic Research Program (ZD [2026] 076)
- Wuwei City Major Science and Technology Special Projects (WW25A03ZDQ002)
- Guizhou Institute of Technology (2023GCC019)
- Guizhou Institute of Technology (XJGC20190948)
This publication has 51 references indexed in Scilit:
- Review on the thermal management and thermal suppression of high-energy-density lithium-ion batteries based on energy-efficient liquid cooling techniquesApplied Thermal Engineering, 2026
- Performance enhancement of battery thermal management based on liquid cooling plate channels embedded with non-uniform spiral fin structuresApplied Thermal Engineering, 2026
- Thermal management of composite phase change material capsule-based lithium-ion battery packs under forced convectionApplied Thermal Engineering, 2026
- Advanced polyethylene glycol based flexible composite phase change materials enabling stable and efficient lithium-ion battery thermal safety managementApplied Thermal Engineering, 2026
- Application of cascaded phase change materials in battery thermal management: Temperature control performance and cycle charge/discharge analysisApplied Thermal Engineering, 2025
- Numerical investigation of fin geometries on the effectiveness of passive, phase-change material −based thermal management systems for lithium-ion batteriesApplied Thermal Engineering, 2024
- Developing a flame-retardant flexible composite phase change material to realize both temperature control and thermal runaway prevention for lithium-ion battery packApplied Thermal Engineering, 2024
- Research on the performance failure of phase change materials thermal management for lithium batteryApplied Thermal Engineering, 2024
- Review on form-stable inorganic hydrated salt phase change materials: Preparation, characterization and effect on the thermophysical propertiesApplied Energy, 2021
- Dual-purpose cooling plate for thermal management of prismatic lithium-ion batteries during normal operation and thermal runawayApplied Thermal Engineering, 2019