Highly Responsive Pd-Decorated MoO3 Nanowall H2 Gas Sensors Obtained from In-Situ-Controlled Thermal Oxidation of Sputtered MoS2 Films
Authors:
Open Access
- 24 May 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (22) , 25741-25752
Abstract
Among transition metal oxides, MoO3 is a promising material due to its layered structure and different oxidation states, making it suitable for different device applications. One of the methods used to grow MoO3 is radio frequency magnetron sputtering (RFMS), which is the most compatible method in industry. However, obtaining nanostructures by RFMS for metal oxides is challenging because of compact morphology film formation. In this study, α-MoO3 with vertical nanowalls is obtained by a two-step process; deposition of magnetron-sputtered MoS2 vertical nanowalls and postoxidation of these structures without changing the morphology. In situ transmittance and electrical measurements are performed to control the oxidation process, which shed light on understanding the oxidation of MoS2 nanowalls. The transition from MoS2 to α-MoO3 is investigated with partially oxidized MoS2/MoO3 samples with different thicknesses. It is also concluded that oxidation starts from nanowalls perpendicular to the substrate and lasts with oxidation of basal planes. Four different thicknesses of α-MoO3 nanowall samples are fabricated for H2 gas sensors. Also, the effect of Pd deposition on the H2-sensing properties of sensors is deeply investigated. An outstanding response of 3.3 × 105 as well as the response and recovery times of 379 and 304 s, respectively, are achieved from the thinnest Pd-loaded sample. Also, the gas-sensing mechanism is explored by gasochromic measurements to investigate the sensor behaviors under the conditions of dry air and N2 gas as the carrier gas.Keywords
Funding Information
- TÜBİTAK (120F231)
This publication has 67 references indexed in Scilit:
- Layer Thinning and Etching of Mechanically Exfoliated MoS2 Nanosheets by Thermal Annealing in AirSmall, 2013
- Hydrogen Gas Sensors Based on Semiconductor Oxide NanostructuresSensors, 2012
- Electrodeposited α- and β-Phase MoO3 Films and Investigation of Their Gasochromic PropertiesCrystal Growth & Design, 2012
- In situ Raman spectroscopy of H2 interaction with WO3 filmsPhysical Chemistry Chemical Physics, 2011
- Single-crystalline orthorhombic molybdenum oxide nanobelts: synthesis and photocatalytic propertiesCrystEngComm, 2010
- Synthesis of nanometre-thick MoO3sheetsNanoscale, 2009
- Characteristics of molybdenum trioxide nanobelts prepared by thermal evaporation techniqueMaterials Chemistry and Physics, 2009
- Thermal evolution in air and argon of nanocrystalline MoS2 synthesized under hydrothermal conditionsInternational Journal of Hydrogen Energy, 2001
- Humidity resistant MoSx films prepared by pulsed magnetron sputteringSurface and Coatings Technology, 2000
- Composition and growth mode of MoSx sputtered filmsJournal of Vacuum Science & Technology A, 1994