Simulation of Engine Power Requirement and Fuel Consumption in a Self-Propelled Crop Collector
Open Access
Abstract
This study attempted to develop and validate a data-driven simulation model that integrates field-measured data to assess the power requirement and fuel consumption characteristics of a self-propelled collector. The collector is a hydrostatic transmission-based, crawler-type platform designed for garlic and onion harvesting, equipped with multiple hydraulic subsystems for collection and sorting. During field experiments, the power requirements of each subsystem and fuel flow rate were recorded, and Willans line method was applied to estimate engine power and subsystem power transmission efficiencies. Because many small agricultural machines do not support electronically instrumented engines (e.g., CAN-bus/ECU-based measurements), the proposed model was formulated as a data-driven, low-order representation derived from on-site measurements rather than a full physics-based model. Using the identified parameters, the simulation framework predicts engine power and fuel efficiency under various operating conditions. The simulation results exhibited high agreement with field data, achieving R2 and mean absolute percentage error values of 0.935–0.981 and 1.79–4.18%, respectively, confirming reliable reproduction of real field performance. A comprehensive analysis of the simulation results revealed that both engine speed and travel speed significantly influence power distribution and fuel rate, while also indicating that hydraulic working power is the dominant contributor to total power demand at higher engine speeds. These findings provide practical guidance for improving the fuel efficiency of compact self-propelled collectors.Keywords
Funding Information
- Rural Development Administration (RS-2023-00232108)
This publication has 22 references indexed in Scilit:
- Vibration and Slope Harvesting Conditions Affect Real-Time Vision-Based Radish Volume Measurements: Experimental Study Using a Laboratory Test BenchJournal of Biosystems Engineering, 2025
- Sweet Potato Farming in the USA and South Korea: A Comparative Study of Cultivation Pattern and Mechanization StatusJournal of Biosystems Engineering, 2025
- A Review of Key Technologies and Intelligent Applications in Soybean Mechanized Harvesting: Chinese and International PerspectivesJournal of Biosystems Engineering, 2025
- Development of a Low-Cost Telemetry System for Draft Measurement of Agriculture ImplementsJournal of Biosystems Engineering, 2024
- The Evolution of Tea Harvesting: A Comprehensive Review of Machinery and Technological AdvancementsJournal of Biosystems Engineering, 2024
- Potato Farming in the United States and South Korea: Status Comparison of Cultivation Patterns and Agricultural Machinery UseJournal of Biosystems Engineering, 2024
- Development of a Novel Draft Sensing Device with Lower Hitch Attachments for Tractor-Drawn ImplementsJournal of Biosystems Engineering, 2024
- Method of controlling tillage depth for agricultural tractors considering engine load characteristicsBiosystems Engineering, 2023
- Reducing fuel consumption in weed and pest control using robotic tractorsComputers and Electronics in Agriculture, 2015
- A simulation model of 2WD tractor performanceComputers and Electronics in Agriculture, 2011