Phosphonium‐based layered silicate—Poly(ethylene terephthalate) nanocomposites: Stability, thermal and mechanical properties
- 17 April 2009
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 113 (3) , 1720-1732
Abstract
PET‐clay nanocomposites were prepared using alkyl quaternary ammonium and phosphonium modified clays by melt‐mixing at 280°C using a micro twin screw extruder. The latter clays were prepared by synthesizing phosphonium surfactants using a simple one‐step method followed by a cation exchange reaction. The onset temperature of decomposition (Tonset) for phosphonium clays (>300°C) was found to be significantly higher than that of ammonium clays (around 240°C). The clay modified with a lower concentration (0.8 meq) of phosphonium surfactant showed a higher Tonset as compared to the clay modified with a higher concentration (1.5 meq) of surfactants. Nanocomposites prepared with octadecyltriphenyl phosphonium (C18P) modified clay showed a higher extent of polymer intercalation as compared with benzyltriphenylphosphonium (BTP) and dodecyltriphenylphosphonium (C12P) modified clays. The nanocomposites prepared with ammonium clays showed a significant decrease in the molecular weight of PET during processing due to thermal degradation of ammonium surfactants. This resulted in a substantial decrease in the mechanical properties. The molecular weight of PET was not considerably reduced during processing upon addition of phosphonium clay. The nanocomposites prepared using phosphonium clays showed an improvement in thermal properties as compared with ammonium clay‐based nanocomposites. Tonset increased significantly in the phosphonium clay‐based nanocomposites and was higher for nanocomposites which contained clay modified with lower amount of surfactant. The tensile strength decreased slightly; however, the modulus showed a significant improvement upon addition of phosphonium clays, as compared with PET. Elongation at break decreased sharply with clay. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009Keywords
This publication has 21 references indexed in Scilit:
- Polymer matrix degradation and color formation in melt processed nylon 6/clay nanocompositesPolymer, 2003
- Polycarbonate nanocomposites: Part 2. Degradation and color formationPolymer, 2003
- Effects of melt‐processing conditions on the quality of poly(ethylene terephthalate) montmorillonite clay nanocompositesJournal of Polymer Science Part B: Polymer Physics, 2002
- Polymer/Layered Silicate Nanocomposites from Thermally Stable Trialkylimidazolium-Treated MontmorilloniteChemistry of Materials, 2002
- Studies on the Mechanism by Which the Formation of Nanocomposites Enhances Thermal StabilityChemistry of Materials, 2001
- Solid-State NMR Investigation of Paramagnetic Nylon-6 Clay Nanocomposites. 2. Measurement of Clay Dispersion, Crystal Stratification, and Stability of Organic ModifiersChemistry of Materials, 2001
- Fire Properties of Polystyrene−Clay NanocompositesChemistry of Materials, 2001
- Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materialsMaterials Science and Engineering: R: Reports, 2000
- Synthesis and properties of two-dimensional nanostructures by direct intercalation of polymer melts in layered silicatesChemistry of Materials, 1993
- Phosphonium salts. III. The action of cyanide ion and other nucleophiles on some bis-phosphonium saltsAustralian Journal of Chemistry, 1969