Experimental Investigation on Plume Characteristics of PTFE-Filled Carbon, Graphite, Graphene for Laser-Assisted Pulsed Plasma Thruster
Open Access
- 16 August 2023
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9283
Abstract
This paper presents an investigation into the plume characteristics of composite propellants fabricated by polytetrafluoroethylene (PTFE) filled with different carbon additives (nano-carbon powder, graphite, and graphene) under laser irradiation in a vacuum environment. The dynamic plumes generated by the laser ablation of different modified propellant samples were captured using a high-speed camera, and the feature parameters of the plumes were extracted by image processing. The results indicated that doping carbon particles in PTFE enhanced the quality of the plasma plumes. The plume area increased up to a certain value and then stabilized, while end of plume clusters remained for a short time. Further analysis revealed that the propellant sample doped with graphene exhibited the maximum plume length and expansion rate, whereas the propellant sample doped with nano-carbon demonstrated the largest plume area. Moreover, a higher graphene doping ratio promoted greater plume length, expansion speed, and plume area. However, when the doping ratio exceeded 3%, the gain of the plume parameters gradually became saturated, and the optimal doping ratio appeared to be 5%.Keywords
Funding Information
- Innovative Research Group Project of the National Natural Science Foundation of China (T2221002)
This publication has 35 references indexed in Scilit:
- Brief review on pulse laser propulsionOptics & Laser Technology, 2018
- Characteristics of a non-volatile liquid propellant in liquid-fed ablative pulsed plasma thrustersJournal of Applied Physics, 2017
- PORTRAIT OF A DARK HORSE: A PHOTOMETRIC AND SPECTROSCOPIC STUDY OF THE ULTRA-FAINT MILKY WAY SATELLITE PEGASUS III*The Astrophysical Journal, 2016
- R&D, Launch and Initial Operation of the Osaka Institute of Technology 1st PROITERES Nano-Satellite with Electrothermal Pulsed Plasma Thrusters and Development of the 2nd and 3rd Satellites2014
- Binary Solid Propellants for Constant Momentum MissionsAIP Conference Proceedings, 2008
- Delrin® for Propulsion with CO[sub 2] Laser: Carbon Doping EffectsAIP Conference Proceedings, 2008
- Effects of ambient pressure and laser fluence on the temporal evolution of 426.7 nm CII line in laser-blow-off of multilayered LiF-C thin filmJournal of Physics D: Applied Physics, 2006
- Determination of laser ablation threshold of Teflon at different harmonics of Nd:YAG laser using photothermal deflection techniqueJournal of Materials Science, 1999
- Performance characterization of a high efficiency gas-fed pulsed plasma thruster1997
- Ablation of polytetrafluoroethylene (Teflon) with femtosecond UV excimer laser pulsesApplied Physics Letters, 1989