Yang Ou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yang Ou has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Jianjun Wu
College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, People’s Republic of China
8 shared publications Yu Zhang
6 shared publicationsJianjun Wu
College of Aerospace Science and Engineering, National University of Defense Technology , Changsha 410073, China
4 shared publicationsSheng Tan
Beijing Institute of Tracking and Telecommunications Technology, Beijing 100094, People’s Republic of China
4 shared publications- Yu Zhang
College of Aerospace Science and Engineering, National University of Defense Technology, Changsha 410073, China
3 shared publications Jian Li
College of Aerospace Science and Engineering National University of Defense Technology 410073 Changsha P.R.China
2 shared publications
Latest Publications
- 5 May 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (18) , 185202
Spatial distribution and mechanism analysis in deposits from an Al–PTFE propellant ablation plasma plume
The interaction between transient ablation plasmas and surfaces governs contamination and performance in pulsed plasma thrusters and related devices. Using nanosecond laser ablation as a controllable plasma source, this study investigates the deposition characteristics of aluminum–polytetrafluoroethylene propellant under high-vacuum conditions. Spatially resolved collection and multi-scale characterization (confocal microscopy, scanning electron microscope, energy-dispersive x-ray spectroscopy) reveal a strong correlation between plume dynamics and deposit properties. The results suggest pronounced spatial anisotropy in deposition, which appears to be associated with laser-induced momentum and asymmetric plume expansion. A systematic morphological evolution is observed: from a porous, ballistically aggregated network in the high-flux core, to dense, thermally sintered (and cracked) ceramic films, and finally to carbon-dominated spherical particulates via gas-phase nucleation and subsequent condensation in the periphery. Energy-dispersive x-ray spectroscopy unveils a sharp chemical stratification: central regions retain high F and Al concentrations, suggesting near-field reactive deposition and in-flight condensation of fluorine-bearing Al–F products (e.g. AlF x ), where as peripheral deposits become carbon-rich and fluorine-deficient due to volatile species escape. This work proposes a unified deposition model that correlates the thermo-chemical evolution of a reactive ablation plasma source with its surface modification patterns. The findings provide fundamental insights into plasma-material interactions and offer a physics-based framework for predicting contamination and improving the design of ablation-based plasma sources.
- 5 May 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (18) , 185202
Spatial distribution and mechanism analysis in deposits from an Al–PTFE propellant ablation plasma plume
The interaction between transient ablation plasmas and surfaces governs contamination and performance in pulsed plasma thrusters and related devices. Using nanosecond laser ablation as a controllable plasma source, this study investigates the deposition characteristics of aluminum–polytetrafluoroethylene propellant under high-vacuum conditions. Spatially resolved collection and multi-scale characterization (confocal microscopy, scanning electron microscope, energy-dispersive x-ray spectroscopy) reveal a strong correlation between plume dynamics and deposit properties. The results suggest pronounced spatial anisotropy in deposition, which appears to be associated with laser-induced momentum and asymmetric plume expansion. A systematic morphological evolution is observed: from a porous, ballistically aggregated network in the high-flux core, to dense, thermally sintered (and cracked) ceramic films, and finally to carbon-dominated spherical particulates via gas-phase nucleation and subsequent condensation in the periphery. Energy-dispersive x-ray spectroscopy unveils a sharp chemical stratification: central regions retain high F and Al concentrations, suggesting near-field reactive deposition and in-flight condensation of fluorine-bearing Al–F products (e.g. AlF x ), where as peripheral deposits become carbon-rich and fluorine-deficient due to volatile species escape. This work proposes a unified deposition model that correlates the thermo-chemical evolution of a reactive ablation plasma source with its surface modification patterns. The findings provide fundamental insights into plasma-material interactions and offer a physics-based framework for predicting contamination and improving the design of ablation-based plasma sources.
- 23 January 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (2)
Plasma plume evolution and magnetic field spatiotemporal distribution of a micro Z-pinch pulsed plasma thruster
This study employs multiple diagnostic techniques, including high-speed photography, optical flow method for velocity field analysis, and B-dot probe magnetic field measurements, to systematically investigate the discharge characteristics, plasma plume evolution, and internal nozzle magnetic field distribution of a micro Z-pinch pulsed plasma thruster (μ-ZPPT). The key findings are as follows: (1) The μ-ZPPT demonstrates a high energy deposition efficiency of 90%, enabling it to accelerate restrike products (15-20 km/s) and harness late-time neutral gas for thrust, thereby alleviating the detrimental impact of the late-time ablation effect. However, a significant 97.3% of this energy is deposited within the initial 0.64 μs, and the subsequent restrike, characterized by negative power, warrants suppression. (2) The evolution of the plasma plume progresses through four distinct stages: initial, development, restrike, and late-time ablation, exhibiting a notable plasma grouping phenomenon. The initial stage is marked by high velocity (up to 65 km/s) and low density, while the subsequent development stage is characterized by low velocity but high density, a clear indication of ablation lagging behind the discharge. Concurrently, the magnetic field evolves from a weak negative field (peak -0.021 T, magnetic pressure 260 Pa) to a strong positive field (peak 0.121 T, magnetic pressure 5600 Pa). (3) The plasma plume’s dynamics are significantly governed by the magnetic field. Specifically, its characteristic downward tilt stems from a high magnetic pressure zone localized in the mid-to-lower region of the nozzle. This study elucidates the fundamental operational mechanisms of the μ-ZPPT, offering critical experimental guidance for optimizing the discharge circuit, mitigating the lag between ablation and discharge, and suppressing the restrike.
- 23 January 2026
- Published by IOP Publishing in Plasma Sources Science and Technology
- Vol. 35 (2)
Plasma plume evolution and magnetic field spatiotemporal distribution of a micro Z-pinch pulsed plasma thruster
This study employs multiple diagnostic techniques, including high-speed photography, optical flow method for velocity field analysis, and B-dot probe magnetic field measurements, to systematically investigate the discharge characteristics, plasma plume evolution, and internal nozzle magnetic field distribution of a micro Z-pinch pulsed plasma thruster (μ-ZPPT). The key findings are as follows: (1) The μ-ZPPT demonstrates a high energy deposition efficiency of 90%, enabling it to accelerate restrike products (15-20 km/s) and harness late-time neutral gas for thrust, thereby alleviating the detrimental impact of the late-time ablation effect. However, a significant 97.3% of this energy is deposited within the initial 0.64 μs, and the subsequent restrike, characterized by negative power, warrants suppression. (2) The evolution of the plasma plume progresses through four distinct stages: initial, development, restrike, and late-time ablation, exhibiting a notable plasma grouping phenomenon. The initial stage is marked by high velocity (up to 65 km/s) and low density, while the subsequent development stage is characterized by low velocity but high density, a clear indication of ablation lagging behind the discharge. Concurrently, the magnetic field evolves from a weak negative field (peak -0.021 T, magnetic pressure 260 Pa) to a strong positive field (peak 0.121 T, magnetic pressure 5600 Pa). (3) The plasma plume’s dynamics are significantly governed by the magnetic field. Specifically, its characteristic downward tilt stems from a high magnetic pressure zone localized in the mid-to-lower region of the nozzle. This study elucidates the fundamental operational mechanisms of the μ-ZPPT, offering critical experimental guidance for optimizing the discharge circuit, mitigating the lag between ablation and discharge, and suppressing the restrike.
- Open Access
- 12 October 2023
- Published by IntechOpen
Impulse Measurement Methods for Space Micro-Propulsion Systems
Space micro-propulsion systems are increasingly considered an attractive option for station-keeping and drag-makeup purposes for the mass- and power-limited satellites due to their critical factors of simple design, small volume, and high specific impulse. These systems typically generate low-range thrust from nN to mN, and their impulses are less than mNs, making it difficult for conventional sensors to detect them directly. Consequently, the design of a special thrust stand is often necessary to measure these micro-propulsion systems. This chapter outlines recommended practices for the operation and calibration of three conventional measurement methods, along with the introduction of an impulse measurement stand developed at the National University of Defense Technology. The chapter presents the fundamentals, calibration method, and experimental results of the stand operation, while also analyzing error sources. Finally, the chapter discusses the demand and direction of micro-impulse measurement development.
- 12 October 2023
- Published by IntechOpen
Open AccessImpulse Measurement Methods for Space Micro-Propulsion Systems
Space micro-propulsion systems are increasingly considered an attractive option for station-keeping and drag-makeup purposes for the mass- and power-limited satellites due to their critical factors of simple design, small volume, and high specific impulse. These systems typically generate low-range thrust from nN to mN, and their impulses are less than mNs, making it difficult for conventional sensors to detect them directly. Consequently, the design of a special thrust stand is often necessary to measure these micro-propulsion systems. This chapter outlines recommended practices for the operation and calibration of three conventional measurement methods, along with the introduction of an impulse measurement stand developed at the National University of Defense Technology. The chapter presents the fundamentals, calibration method, and experimental results of the stand operation, while also analyzing error sources. Finally, the chapter discusses the demand and direction of micro-impulse measurement development.
- Open Access
- 16 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9283
Experimental Investigation on Plume Characteristics of PTFE-Filled Carbon, Graphite, Graphene for Laser-Assisted Pulsed Plasma Thruster
This paper presents an investigation into the plume characteristics of composite propellants fabricated by polytetrafluoroethylene (PTFE) filled with different carbon additives (nano-carbon powder, graphite, and graphene) under laser irradiation in a vacuum environment. The dynamic plumes generated by the laser ablation of different modified propellant samples were captured using a high-speed camera, and the feature parameters of the plumes were extracted by image processing. The results indicated that doping carbon particles in PTFE enhanced the quality of the plasma plumes. The plume area increased up to a certain value and then stabilized, while end of plume clusters remained for a short time. Further analysis revealed that the propellant sample doped with graphene exhibited the maximum plume length and expansion rate, whereas the propellant sample doped with nano-carbon demonstrated the largest plume area. Moreover, a higher graphene doping ratio promoted greater plume length, expansion speed, and plume area. However, when the doping ratio exceeded 3%, the gain of the plume parameters gradually became saturated, and the optimal doping ratio appeared to be 5%.
- 16 August 2023
- Published by MDPI AG in Applied Sciences
- Vol. 13 (16) , 9283
Open AccessExperimental Investigation on Plume Characteristics of PTFE-Filled Carbon, Graphite, Graphene for Laser-Assisted Pulsed Plasma Thruster
This paper presents an investigation into the plume characteristics of composite propellants fabricated by polytetrafluoroethylene (PTFE) filled with different carbon additives (nano-carbon powder, graphite, and graphene) under laser irradiation in a vacuum environment. The dynamic plumes generated by the laser ablation of different modified propellant samples were captured using a high-speed camera, and the feature parameters of the plumes were extracted by image processing. The results indicated that doping carbon particles in PTFE enhanced the quality of the plasma plumes. The plume area increased up to a certain value and then stabilized, while end of plume clusters remained for a short time. Further analysis revealed that the propellant sample doped with graphene exhibited the maximum plume length and expansion rate, whereas the propellant sample doped with nano-carbon demonstrated the largest plume area. Moreover, a higher graphene doping ratio promoted greater plume length, expansion speed, and plume area. However, when the doping ratio exceeded 3%, the gain of the plume parameters gradually became saturated, and the optimal doping ratio appeared to be 5%.
- 1 July 2020
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 91 (7) , 074501
Design and experimental results of a laser-ignited solid-propellant-fed magnetoplasmadynamic thruster
A laser-ignited solid-propellant-fed magnetoplasmadynamic thruster (LISMPDT) is developed and tested. In this kind of thruster, a solid propellant is placed in a hollow cathode tube. When it works, the propellant is ablated and partially ionized by the laser; then, the plasma flow enters the chamber and is accelerated by the electromagnetic interaction. Unlike the typical magnetoplasmadynamic thrusters, almost any solid material can be used as a propellant in the LISMPDT; no tanks, valves, or piping systems are required for the propulsion system. Moreover, as the particles involved in the discharge process are produced from the laser ablation process, it would lead to a directed initial velocity and higher ionization. Meanwhile, a part of the energy serving the thruster could also be derived from the laser quasi as an add-on to the discharge energy with the separation of the ignition power and the ignition power unit from the thruster system. Experiments on the discharge characteristics and thrust performances were conducted and analyzed. The results validated the feasibility of the LISMPDT, and the maximal specific impulse reached ∼780 s, while the maximal thrust efficiency was expected to be about 9% under different operating conditions. It was also found that increasing the initial discharge voltage would effectively improve the propulsion performance while a longer laser pulse width led to reduced performance.
- 1 July 2020
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 91 (7) , 074501
Design and experimental results of a laser-ignited solid-propellant-fed magnetoplasmadynamic thruster
A laser-ignited solid-propellant-fed magnetoplasmadynamic thruster (LISMPDT) is developed and tested. In this kind of thruster, a solid propellant is placed in a hollow cathode tube. When it works, the propellant is ablated and partially ionized by the laser; then, the plasma flow enters the chamber and is accelerated by the electromagnetic interaction. Unlike the typical magnetoplasmadynamic thrusters, almost any solid material can be used as a propellant in the LISMPDT; no tanks, valves, or piping systems are required for the propulsion system. Moreover, as the particles involved in the discharge process are produced from the laser ablation process, it would lead to a directed initial velocity and higher ionization. Meanwhile, a part of the energy serving the thruster could also be derived from the laser quasi as an add-on to the discharge energy with the separation of the ignition power and the ignition power unit from the thruster system. Experiments on the discharge characteristics and thrust performances were conducted and analyzed. The results validated the feasibility of the LISMPDT, and the maximal specific impulse reached ∼780 s, while the maximal thrust efficiency was expected to be about 9% under different operating conditions. It was also found that increasing the initial discharge voltage would effectively improve the propulsion performance while a longer laser pulse width led to reduced performance.
- 28 August 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (45) , 455203
Study of scaling law for particle-in-cell/Monte Carlo simulation of low-temperature magnetized plasma for electric propulsion
Particle-in-cell/Monte Carlo collision (PIC/MCC) algorithms are an outstanding numerical method for predicting the kinetic characteristics of discharge plasma. However, heavy computational costs limit its application, especially in large-scale plasma simulations. To investigate the distribution properties of plasma in magnetoplasmadynamic (MPD) thrusters, we used a scale reduction method called scaling law to simplify and accelerate the PIC/MCC simulation. In this method, the physical processes, including the particle motion and collisions, of discharge plasma remained unchanged, thereby preserving the similarity of the discharge system before and after scaling. On the basis of the scaling law, all the scaling schemes of the relevant physical quantities were obtained. We verified the scaling law by analysing the electron trajectories and densities in electromagnetic fields at different scaling factors. The scaling methodology shows great advantages in reducing the total computation and the time to achieve the convergence of the simulation. Therefore, the PIC/MCC model with the scaling law provides an efficient and in-depth understanding of the discharge plasma in MPD thrusters.
- 28 August 2019
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 52 (45) , 455203
Study of scaling law for particle-in-cell/Monte Carlo simulation of low-temperature magnetized plasma for electric propulsion
Particle-in-cell/Monte Carlo collision (PIC/MCC) algorithms are an outstanding numerical method for predicting the kinetic characteristics of discharge plasma. However, heavy computational costs limit its application, especially in large-scale plasma simulations. To investigate the distribution properties of plasma in magnetoplasmadynamic (MPD) thrusters, we used a scale reduction method called scaling law to simplify and accelerate the PIC/MCC simulation. In this method, the physical processes, including the particle motion and collisions, of discharge plasma remained unchanged, thereby preserving the similarity of the discharge system before and after scaling. On the basis of the scaling law, all the scaling schemes of the relevant physical quantities were obtained. We verified the scaling law by analysing the electron trajectories and densities in electromagnetic fields at different scaling factors. The scaling methodology shows great advantages in reducing the total computation and the time to achieve the convergence of the simulation. Therefore, the PIC/MCC model with the scaling law provides an efficient and in-depth understanding of the discharge plasma in MPD thrusters.
- Open Access
Modeling of Scramjet Combustors Based on Model Migration and Process Similarity
Contributed by the low cost, the simulation method is considered an attractive option for the optimization and design of the supersonic combustor. Unfortunately, accurate and satisfactory modeling is time-consuming and cost-consuming because of the complex processes and various working conditions. To address this issue, a mathematical modeling for the combustor on the basis of the clustering algorithm, machine learning algorithm, and model migration strategy is developed in this paper. A general framework for the migration strategy of the combustor model is proposed among the similar combustors, and the base model, which is developed by training the machine learning model with data from the existing combustion processes, is amended to fit the unexampled combustor using the model migration strategy with a few data. The simulation results validate the effectiveness of the development strategy, and the migrated model is proved to be suitable for the new combustor in higher accuracy with less time and calculation.
Open AccessModeling of Scramjet Combustors Based on Model Migration and Process Similarity
Contributed by the low cost, the simulation method is considered an attractive option for the optimization and design of the supersonic combustor. Unfortunately, accurate and satisfactory modeling is time-consuming and cost-consuming because of the complex processes and various working conditions. To address this issue, a mathematical modeling for the combustor on the basis of the clustering algorithm, machine learning algorithm, and model migration strategy is developed in this paper. A general framework for the migration strategy of the combustor model is proposed among the similar combustors, and the base model, which is developed by training the machine learning model with data from the existing combustion processes, is amended to fit the unexampled combustor using the model migration strategy with a few data. The simulation results validate the effectiveness of the development strategy, and the migrated model is proved to be suitable for the new combustor in higher accuracy with less time and calculation.
- Open Access
Modified Electromechanical Modeling and Parameters Analysis of Magnetoplasmadynamic Thruster
To predict the thrust of magnetoplasmadynamic thrusters (MPDTs), a modified electromechanical model was proposed and a comparison with experimental results is presented in this paper. The motion of propellant in the thruster was divided into two portions: the axial motion which was accelerated by the interaction of current and induced self-field, and the swirling motion which was accelerated by the interaction of current and applied magnetic field. The electromechanical model was in good agreement with the experimental data, and the fitting degrees of the model were greater than 0.93. Furthermore, the influence of parameters on the performance of MPDT were investigated by utilizing the electromechanical model. The results indicate that the thrust performance of the thruster improved with the increase of discharge current, anode radius, applied magnetic field strength, and the decrease of mass flow rate. However, the large anode radius and low mass flow rate readily led to the failure of thruster function. Therefore, the model can not only predict the thrust performance of MPDTs, but also guide the design and operation optimization of the thruster.
Open AccessModified Electromechanical Modeling and Parameters Analysis of Magnetoplasmadynamic Thruster
To predict the thrust of magnetoplasmadynamic thrusters (MPDTs), a modified electromechanical model was proposed and a comparison with experimental results is presented in this paper. The motion of propellant in the thruster was divided into two portions: the axial motion which was accelerated by the interaction of current and induced self-field, and the swirling motion which was accelerated by the interaction of current and applied magnetic field. The electromechanical model was in good agreement with the experimental data, and the fitting degrees of the model were greater than 0.93. Furthermore, the influence of parameters on the performance of MPDT were investigated by utilizing the electromechanical model. The results indicate that the thrust performance of the thruster improved with the increase of discharge current, anode radius, applied magnetic field strength, and the decrease of mass flow rate. However, the large anode radius and low mass flow rate readily led to the failure of thruster function. Therefore, the model can not only predict the thrust performance of MPDTs, but also guide the design and operation optimization of the thruster.
- Open Access
A Model of Ultra-Short Pulsed Laser Ablation of Metal with Considering Plasma Shielding and Non-Fourier Effect
In this paper, a non-Fourier heat conduction model of ultra-short pulsed laser ablation of metal is established that takes into account the effect of the heat source, laser heating of the target, the evaporation and phase explosion of target material, the formation and expansion of the plasma plume, and interaction of the plasma plume with the incoming laser. Temperature dependent optical and thermophysical properties are also considered in the model due to the properties of the target will change over a wide range during the ultra-short pulsed laser ablation process. The results show that the plasma shielding has a great influence on the process of ultra-short pulsed laser ablation, especially at higher laser fluence. The non-Fourier effect has a great influence on the temperature characteristics and ablation depth of the target. The ultra-short pulsed laser ablation can effectively reduce the heat affected zone compared to nanosecond pulsed laser ablation. The comparison between the simulation results and the experimental results in the literature shows that the model with the plasma shielding and the non-Fourier effect can simulate the ultra-short pulsed laser ablation process better.
Open AccessA Model of Ultra-Short Pulsed Laser Ablation of Metal with Considering Plasma Shielding and Non-Fourier Effect
In this paper, a non-Fourier heat conduction model of ultra-short pulsed laser ablation of metal is established that takes into account the effect of the heat source, laser heating of the target, the evaporation and phase explosion of target material, the formation and expansion of the plasma plume, and interaction of the plasma plume with the incoming laser. Temperature dependent optical and thermophysical properties are also considered in the model due to the properties of the target will change over a wide range during the ultra-short pulsed laser ablation process. The results show that the plasma shielding has a great influence on the process of ultra-short pulsed laser ablation, especially at higher laser fluence. The non-Fourier effect has a great influence on the temperature characteristics and ablation depth of the target. The ultra-short pulsed laser ablation can effectively reduce the heat affected zone compared to nanosecond pulsed laser ablation. The comparison between the simulation results and the experimental results in the literature shows that the model with the plasma shielding and the non-Fourier effect can simulate the ultra-short pulsed laser ablation process better.
- Open Access
- 1 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 408 (1) , 012001
One Micro-thrust Measurement Method Based on the Dynamic Photoelastic Theory
A new method is adopted to measure the micro-thrust of the plasma thruster. In this method, the dynamic photoelastic theory is used to record the stress loaded on the special structure. This technique is called dynamic photoelasticity method. The photoelastic element is the core of the whole system as it can transform the thrust changes into the variation of fringe images. The variation of thrust can be recorded by a CCD camera and then the thrust changes in real-time could be obtained, which is helpful for developing a higher precision propulsion system. This method built in this paper is not only non-contact and non-destructive but also easy to operate with simple structure and high precision.
- 1 October 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 408 (1) , 012001
Open AccessOne Micro-thrust Measurement Method Based on the Dynamic Photoelastic Theory
A new method is adopted to measure the micro-thrust of the plasma thruster. In this method, the dynamic photoelastic theory is used to record the stress loaded on the special structure. This technique is called dynamic photoelasticity method. The photoelastic element is the core of the whole system as it can transform the thrust changes into the variation of fringe images. The variation of thrust can be recorded by a CCD camera and then the thrust changes in real-time could be obtained, which is helpful for developing a higher precision propulsion system. This method built in this paper is not only non-contact and non-destructive but also easy to operate with simple structure and high precision.