Research on Mechanical Properties of Steel-Polypropylene Fiber-Reinforced Concrete after High-Temperature Treatments
Open Access
- 30 April 2024
- journal article
- research article
- Published by MDPI AG in Applied Sciences
- Vol. 14 (9) , 3861
Abstract
A mechanical property experiment was carried out on steel-polypropylene fiber-reinforced concrete after elevated temperatures by using a 50 mm diameter SHPB apparatus. The regulations of compressive strength, elastic modulus, Poisson’s ratio, and other mechanical properties under six heating temperature levels (normal temperature, 100 °C, 200 °C, 400 °C, 600 °C, and 800 °C) and three impact pressures (0.3 MPa, 0.4 MPa, 0.5 MPa) were studied. Using ANSYS/LS-DYNA 19.0 numerical simulation software and LS-PrePost post-processing software, numerical simulation analysis was conducted on the dynamic Hopkinson uniaxial impact compression and uniaxial dynamic impact splitting mechanical experiments of C40 plain concrete and steel-polypropylene hybrid fiber concrete. The results show that the dynamic compressive strength of hybrid fiber concrete with the optimal dosage reaches its maximum at a temperature group of 200 °C, and the dynamic compressive strength of hybrid fiber concrete with the optimal dosage increases by 97.1% compared to C40 plain concrete at a temperature group of 800 °C. The impact waveform and stress-strain curve results of the numerical simulation are very similar to the experimental results. The errors in calculating the peak stress and peak strain are within 6%, which can truly and accurately simulate the static mechanical properties and failure process of hybrid fiber-reinforced concrete.Keywords
Funding Information
- Special Basic Cooperative Research Programs of the Yunnan Provincial Undergraduate University’s Association (202301BA070001-012, 202101BA070001-137)
This publication has 8 references indexed in Scilit:
- Influence of thermal cycles and high-temperature exposures on the residual strength of hybrid steel/glass fiber-reinforced self-consolidating concreteStructures, 2023
- Modifications of the HJC (Holmquist–Johnson–Cook) Model for an Improved Numerical Simulation of Roller Compacted Concrete (RCC) Structures Subjected to Impact LoadingsMaterials, 2020
- Dynamic splitting tensile properties of concrete and cement mortarFatigue & Fracture of Engineering Materials & Structures, 2019
- A novel solar reflective coating with functional gradient multilayer structure for cooling asphalt pavementsConstruction and Building Materials, 2019
- Influence of high temperature on the mechanical properties of hybrid fibre reinforced normal and high strength concreteConstruction and Building Materials, 2018
- An experimental study of high strain-rate properties of clay under high consolidation stressSoil Dynamics and Earthquake Engineering, 2017
- High temperature behaviour of hybrid steel–PVA fibre reinforced reactive powder concreteMaterials and Structures, 2015
- Effect of Temperature on Thermal Properties of Different Types of High-Strength ConcreteJournal of Materials in Civil Engineering, 2011