Influence of tool rotational speed on microstructural characteristics and mechanical properties of friction stir processed AA5754 aluminium alloy under overlap configuration
Open Access
- 1 July 2025
- journal article
- Published by IOP Publishing in Materials Research Express
- Vol. 12 (7) , 076515
Abstract
Friction Stir Processing (FSP) is a variant of the Friction Stir Welding (FSW) technique. Recently, FSP has been extensively used to modify the microstructure of many low-temperature alloys and subsequently to enhance the mechanical properties. Dynamic recrystallization caused by the rotating tool is the main reason for modifying (refining) the microstructure in the stir zone. Since this process operates under solid-state conditions, it eliminates many solidification-related problems. In this research work, 6-mm-thick AA5754 aluminium alloy sheets were overlapped to attain a total thickness of 12 mm. A tapered-threaded HSS tool was then used to perform friction stir processing at the center of the overlapped plates using five different rotational speeds. The other parameters were kept constant. This investigation found that a tool’s rotational speed of 700 rpm yielded a defect-free FSP region, likely due to optimum heat generation under this condition. Moreover, the FSP material at 700 rpm exhibited a maximum tensile strength of 245 MPa. This is mainly due to the formation of finer grains and more refined strengthening precipitates in the FSP region. It is concluded that the tool’s rotational speed plays a vital role in heat generation and subsequently influences the microstructure and mechanical properties.Keywords
This publication has 24 references indexed in Scilit:
- Influence of cryogenic treatment on mechanical and ballistic properties of AA5754 alloy friction stir welded jointsDefence Technology, 2025
- Studying the effect of processing parameters on the microstructure, strength, hardness, and corrosion characteristics of friction stir dissimilar welded AA5083 and AA7075 aluminum alloys reinforced with Al-SiC matrixHeliyon, 2024
- Taguchi-based optimisation of FSW parameters for advancement in aerospace materials: Al-Li 2060 alloyHeliyon, 2024
- Impact of Differential Cooling Rates on Wire Arc Additive Manufactured HSLA Steel ComponentMetallography, Microstructure, and Analysis, 2024
- Mechanical and Metallurgical Characteristics of Wire-Arc Additive Manufactured HSLA Steel Component Using Cold Metal Transfer TechniqueAdditive Manufacturing Frontiers, 2024
- Influence of rotation speed, transverse speed, and pin length during underwater friction stir welding (UW-FSW) on aluminum AA6063: A novel criterion for parametric controlInternational Journal of Lightweight Materials and Manufacture, 2022
- Prediction of relationship between angular velocity to the pitch line velocity (ω/v) on tensile strength of friction stir welded AA2014-T6 Aluminium alloy jointsForces in Mechanics, 2021
- Aluminum alloys in marine construction: characteristics, application, and problems from a fabrication viewpointMarine Systems & Ocean Technology, 2019
- Friction stir welding of aluminum 6061-T6 in presence of watercooling: Analyzing mechanical properties and residual stress distributionInternational Journal of Lightweight Materials and Manufacture, 2019
- Optimization of Mechanical Properties of Friction Stir Spot Welded Joints for Dissimilar Aluminum Alloys (AA2024-T3 and AA 5754-H114)Arabian Journal for Science and Engineering, 2016