An Experimental Study of Shell-and-Tube Heat Exchangers With Continuous Helical Baffles
- 23 January 2007
- journal article
- Published by Wiley in Journal of Heat Transfer
- Vol. 129 (10) , 1425-1431
Abstract
Two shell-and-tube heat exchangers (STHXs) using continuous helical baffles instead of segmental baffles used in conventional STHXs were proposed, designed, and tested in this study. The two proposed STHXs have the same tube bundle but different shell configurations. The flow pattern in the shell side of the heat exchanger with continuous helical baffles was forced to be rotational and helical due to the geometry of the continuous helical baffles, which results in a significant increase in heat transfer coefficient per unit pressure drop in the heat exchanger. Properly designed continuous helical baffles can reduce fouling in the shell side and prevent the flow-induced vibration as well. The performance of the proposed STHXs was studied experimentally in this work. The heat transfer coefficient and pressure drop in the new STHXs were compared with those in the STHX with segmental baffles. The results indicate that the use of continuous helical baffles results in nearly 10% increase in heat transfer coefficient compared with that of conventional segmental baffles for the same shell-side pressure drop. Based on the experimental data, the nondimensional correlations for heat transfer coefficient and pressure drop were developed for the proposed continuous helical baffle heat exchangers with different shell configurations, which might be useful for industrial applications and further study of continuous helical baffle heat exchangers. This paper also presents a simple and feasible method to fabricate continuous helical baffles used for STHXs.Keywords
This publication has 8 references indexed in Scilit:
- An experimental heat transfer study for helically flowing outside petal-shaped finned tubes with different geometrical parametersApplied Thermal Engineering, 2007
- Estimating Number of Shells in Shell and Tube Heat Exchangers: A New Approach Based on Temperature CrossJournal of Heat Transfer, 2000
- Visualization and determination of local heat transfer coefficients in shell-and-tube heat exchangers for staggered tube arrangement by mass transfer measurementsExperimental Thermal and Fluid Science, 1998
- Effect of the leakage on pressure drop and local heat transfer in shell-and-tube heat exchangers for staggered tube arrangementInternational Journal of Heat and Mass Transfer, 1998
- Helical Baffles in Shell-and-Tube Heat Exchangers, Part I: Experimental VerificationHeat Transfer Engineering, 1996
- A new design method for segmentally baffled heat exchangersComputers & Chemical Engineering, 1995
- Pressure Drop Measurements on the Shell Side of a Cylindrical Shell-and-Tube Heat ExchangerHeat Transfer Engineering, 1994
- Comparison of Correction Factors for Shell-and-Tube Heat Exchangers with Segmental or Helical BafflesHeat Transfer Engineering, 1994