A PREDICTIVE MODEL FOR GAS FUELED SPARK IGNITION ENGINE APPLICATIONS
Authors:
- 25 October 1999
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
A predictive procedure for establishing the performance parameters of spark ignition engines fueled with a range of gaseous fuels and their mixtures is described. The incidence of knock and its relative intensity are also accounted for. The two-zone model incorporates a procedure for deriving an estimate of the effective duration of combustion and the associated mass burning rate for various operating conditions and gaseous fuels. The preignition chemical reaction activity of the unburned end gas zone and its consequences on cylinder pressure development is evaluated while using detailed chemical kinetics. The onset of autoignition and knock is established via a parameter that monitors the incremental pressure increase solely due to the preignition reaction activity per unit of mean effective combustion pressure. This knock parameter corresponds also to the specific energy release within the end gas due to the preignition reaction activity relative to the total energy released by combustion per unit of initial cylinder volume. For normal knock-free combustion the value of this parameter remains throughout very low, while for knocking combustion its value exceeds a certain acceptable limit. The more intense the knocking the earlier this value is reached. It is to be shown that this relatively simple model can be used to predict many aspects of engine performance parameters including the incidence of knock and account for cyclic variations as well as to be used in analytical optimization procedures. Experimental results obtained in a CFR engine for different fuels that include methane, hydrogen, ethane, propane and their mixtures yield satisfactory agreement with the corresponding predicted values.Keywords
This publication has 20 references indexed in Scilit:
- A PREDICTIVE MODEL FOR GAS FUELED SPARK IGNITION ENGINE APPLICATIONSSAE International Journal of Advances and Current Practices in Mobility, 1999
- An Analytical Approach for the Optimization of a SI Engine Performance Including the Consideration of KnockSAE International Journal of Advances and Current Practices in Mobility, 1998
- An Investigation of the Lean Operational Limits of Gas-Fueled Spark Ignition EnginesJournal of Energy Resources Technology, 1996
- State of the art and future needs in S.I. engine combustionSymposium (International) on Combustion, 1994
- Prediction of the Performance of Spark Ignition Gas Engines Including KnockSAE International Journal of Advances and Current Practices in Mobility, 1993
- A Predictive Model for Knock in Spark Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1992
- Experimental and Analytical Studies of the Lean Operational Limits in Methane Fuelled Spark Ignition and Compression Ignition EnginesSAE International Journal of Advances and Current Practices in Mobility, 1989
- A Diagnostic Two-Zone Combustion Model for Spark-Ignition Engines Based on Pressure-Time DataSAE International Journal of Advances and Current Practices in Mobility, 1988
- A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion EngineSAE International Journal of Advances and Current Practices in Mobility, 1967
- Flammability characteristics of combustible gases and vapors1964