Selective Isolation of Surface Grain Boundaries by Oxide Dielectrics Improves Cd(Se,Te) Device Performance
Open Access
- 24 January 2025
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (5) , 7641-7647
Abstract
Cd(Se,Te) photovoltaics (PV) are the most widely deployed thin-film solar technology globally, yet continued efficiency improvements are stymied by challenges at the device hole contacts. The inclusion of solution-processed oxide layers such as AlGaOx in the contact stack has yielded improved device open-circuit voltages (VOC) and fill factors (FF). However, contradictory mechanisms by which these layers improve the device properties have been proposed by the research community. We demonstrate in this work that an underappreciated property of such spin-coated layers is the preferential deposition at grain boundaries, a process that isolates the grain boundaries during contact metallization. The effects of grain-boundary isolation are probed by varying the coverage of solution-processed AlGaOx "barrier" layers on the Cd(Se,Te) surface, quantified by scanning Auger microscopy. Examining coverage-dependent VOC and FF, it was observed that isolating the grain boundaries during metallization is sufficient to prevent damage to the absorber that occurs in devices lacking a barrier layer, while additional coverage contributes to the increased series resistance. Such an effect is agnostic to the material used as a barrier layer, as long as the material does not itself damage the absorber. Spin-coated SiOx was used in place of AlGaOx for an equally beneficial effect. This grain-boundary isolation phenomenon is also observed during Mo deposition and in absorbers that have been contacted with a nitrogen-doped ZnTe layer. The mechanisms by which metallization may degrade the absorber are discussed, as are contact design strategies leveraging barrier layers, which may lead to improved device efficiencies.Keywords
Funding Information
- National Laboratory of the Rockies (DE-AC36-08GO28308)
- Solar Energy Technologies Office (38257)
This publication has 27 references indexed in Scilit:
- CdTe-based thin film photovoltaics: Recent advances, current challenges and future prospectsSolar Energy Materials and Solar Cells, 2023
- Band Bending at CdTe Solar Cell Contacts: Correlating Electro‐Optical and X‐Ray Photoelectron Spectroscopy Analyses of Thin Film Solar CellsSolar RRL, 2023
- Embodied energy and carbon from the manufacture of cadmium telluride and silicon photovoltaicsJoule, 2022
- 3D/2D passivation as a secret to success for polycrystalline thin-film solar cellsJoule, 2021
- Back contacts materials used in thin film CdTe solar cells—A reviewEnergy Science & Engineering, 2021
- Development of ZnTe as a back contact material for thin film cadmium telluride solar cellsVacuum, 2017
- Diffusion of Cd vacancy and interstitials of Cd, Cu, Ag, Au and Mo in CdTe: A first principles investigationSolar Energy, 2014
- Non-stoichiometry and electronic properties of interfacesJournal of Materials Science, 2007
- Effect of back-contact barrier on thin-film CdTe solar cellsThin Solid Films, 2006
- A review of ohmic and rectifying contacts on cadmium tellurideSolid-State Electronics, 1985