Application of Static Charge Dissipation to Mitigate Electric Discharge Bearing Currents
Authors:
- H. William OhHOH. William Oh
- 22 January 2008
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 44 (1) , 135-143
Abstract
Today, the physical cause-and-effect chains of inverter-induced high-frequency bearing currents have been well understood, but little has been known on not only theoretically possible, but also cost-effective mitigation techniques for a certain drive configuration. This paper focuses on the mitigation of discharge bearing currents, which occur predominantly with smaller motors of up to several kilowatts. We present a new mitigation technique where any voltage build-up across the bearing is discharged via static charge dissipation through a parallel path before an electric breakdown inside the bearing occurs. The technique is based on the field emission effect, has ultralow friction and negligible wear, and is very robust toward contamination, when compared with conventional carbon-based brushes.Keywords
This publication has 23 references indexed in Scilit:
- Don't lose your bearingsIEEE Industry Applications Magazine, 2006
- Calculation of motor capacitances for prediction of discharge bearing currents in machines of inverter-based drive systems2005
- Bearing Current Remediation Options: Sources, Investigative Measurements, and Installation Modifications to Reduce Damage as a Result of Bearing CurrentsIEEE Industry Applications Magazine, 2004
- Circuit model for shaft voltage prediction in induction motors fed by PWM-based AC drivesIEEE Transactions on Industry Applications, 2003
- Bearing Fluting: The Results of a Long-Term Investigation into Bearing Fluting on AC Motors, DC Motors, and Rolls on Paper MachinesIEEE Industry Applications Magazine, 2002
- Electrical breakdown in atmospheric air between closely spaced (0.2 μm-40 μm) electrical contactsIEEE Transactions on Components and Packaging Technologies, 2002
- Arc erosion behaviour of silver electriccontacts in a singlearc discharge across a static gapIEE Proceedings - Science, Measurement and Technology, 2001
- Experience with variable-frequency drives and motor bearing reliabilityIEEE Transactions on Industry Applications, 2001
- Electric field breakdown at micrometre separationsNanotechnology, 1999
- Physical properties of thin-film field emission cathodes with molybdenum conesJournal of Applied Physics, 1976