Effect of RANS Method on the Stall Onset Prediction by an Eigenvalue Approach
- 5 October 2018
- journal article
- research article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 141 (3)
Abstract
The eigenvalue approach is a recently developed compressor stability model used to predict stall onset. In this model, the flow field from a Reynolds-averaged Navier–Stokes (RANS) simulation provides the basic flow. This paper presents the effect of the RANS methods (including the computational grid, the turbulence model, and the spatial discretization scheme) on the eigenvalue and investigates the most influencing flow structures to the eigenvalue. The test compressor was the transonic compressor of NASA Rotor 37. Three individual meshes with different grid densities were used to validate the grid independence, and the results indicated that RANS simulation and eigenvalue calculation obtain grid independence at the same grid density. Then, the effect of four turbulence models (including Spalart–Allmaras (SA) turbulence model, two different k–ε models with the extended wall function model (EWFKE), and the Yang–Shih model (YSKE), and k–ω shear stress transport (SST) model), and three spatial discretization schemes (the central scheme, the flux difference splitting (FDS) scheme, and the symmetric total variation diminishing (STVD)) was also studied. Further investigation showed that the SA turbulence model combined with the STVD scheme provided the best stall point prediction, with a relative error of 0.05%. Detailed exploration of the three-dimensional flow field revealed that there were two flow patterns near the blade tip necessary for precisely predicting stall onset: the flow blockage generated by the shockwave-tip leakage vortex (TLV) interaction, and the trailing edge separation and corresponding wake flow. The effect of the blockage was greater than the effect of the trailing edge flow.Keywords
Funding Information
- National Natural Science Foundation of China (51406229)
This publication has 42 references indexed in Scilit:
- Modification of Spalart–Allmaras model with consideration of turbulence energy backscatter using velocity helicityPhysics Letters A, 2011
- Compressibility Effect in Vortex IdentificationAIAA Journal, 2009
- Turbulence Models Assessment for Large-Scale Tip Vortices in an Axial Compressor RotorJournal of Propulsion and Power, 2008
- BOUNDARY-LAYER RECEPTIVITY TO FREESTREAM DISTURBANCESAnnual Review of Fluid Mechanics, 2002
- A Computational Model for Short-Wavelength Stall Inception and Development in Multistage CompressorsJournal of Turbomachinery, 1999
- Approximate Riemann Solvers, Parameter Vectors, and Difference SchemesJournal of Computational Physics, 1997
- Experimental and Computational Investigation of the Tip Clearance Flow in a Transonic Axial Compressor RotorJournal of Turbomachinery, 1996
- The Effect of Adding Roughness and Thickness to a Transonic Axial Compressor RotorJournal of Turbomachinery, 1995
- Two-equation eddy-viscosity turbulence models for engineering applicationsAIAA Journal, 1994
- New time scale based k-epsilon model for near-wall turbulenceAIAA Journal, 1993