Regeneration and reuse of magnesium oxide (MgO) nanocrystallites
- 9 January 2019
- journal article
- research article
- Published by Taylor & Francis in Separation Science and Technology
- Vol. 54 (2) , 275-281
Abstract
The study focuses on regeneration and reuse of in-house synthesized MgO nanocrystallites used as an adsorbent for the removal of Acid Orange 7 dye from wastewater. The dye-adsorbed MgO were regenerated by two major steps: drying and combustion. The used MgO were dried at room temperature of 35°C ± 5°C, at an optimized time of 8–10 h time and the dried MgO were combusted at an optimized temperature of 500°C in muffle furnace for 25 min. The regeneration and reuse of MgO could be effectively carried out for five adsorption-combustion cycles. In every cycle of regeneration, 8–10% by weight of MgO was lost. The X-ray diffraction analysis showed the phase purity and the calculated crystallite size of synthesized, first, second, third, fourth and fifth regenerated MgO were noted as 21.67, 21.67, 21.67, 24.74, 24.74 and 24.74 nm, respectively. The scanning electron microscopy analysis showed that agglomeration of regenerated MgO particles increased with the increase in number of adsorption-combustion cycles.Keywords
This publication has 7 references indexed in Scilit:
- An efficient bio-adsorbent for the removal of dye: Adsorption studies and cold atmospheric plasma regenerationJournal of the Taiwan Institute of Chemical Engineers, 2016
- Effective regeneration of an adsorbent for the removal of organic contaminants developed based on UV radiation and toxicity evaluationReactive and Functional Polymers, 2015
- Magnetized bentonite by Fe3O4 nanoparticles treated as adsorbent for methylene blue removal from aqueous solution: Synthesis, characterization, mechanism, kinetics and regenerationJournal of the Taiwan Institute of Chemical Engineers, 2015
- Regeneration of carbonaceous adsorbents. Part I: Thermal RegenerationMicroporous and Mesoporous Materials, 2015
- Adsorption of methylene blue onto humic acid-coated Fe3O4 nanoparticlesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2013
- Kinetics and thermodynamics of reactive and vat dyes adsorption on MgO nanoparticlesChemical Engineering Journal, 2012
- Synthesis and characterization of MgO nanocrystals using strong and weak basesPowder Technology, 2012