Treatment with orthophosphoric acid enhances the thermal stability of the piezoelectricity in low-density polyethylene ferroelectrets
- 15 June 2012
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 111 (12) , 124105
Abstract
Ferroelectrets have been fabricated from low-density polyethylene (LDPE) films by means of a template-based lamination. The temperature dependence of the piezoelectric d33 coefficient has been investigated. It was found that low-density polyethylene ferroelectrets have rather low thermal stability with the piezoelectric coefficient decaying almost to zero already at 100 °C. This behavior is attributed to the poor electret properties of the polyethylene films used for the fabrication of the ferroelectrets. In order to improve the charge trapping and the thermal stability of electret charge and piezoelectricity, LDPE ferroelectrets were treated with orthophosphoric acid. The treatment resulted in considerable improvements of the charge stability in LDPE films and in ferroelectret systems made from them. For example, the charge and piezoelectric-coefficient decay curves shifted to higher temperatures by 60 K and 40 K, respectively. It is shown that the decay of the piezoelectric coefficient in LDPE ferroelectrets is governed by the relaxation of less stable positive charges. The treatment also leads to noticeable changes in the chemical composition of the LDPE surface. Infrared spectroscopy reveals absorption bands attributed to phosphorus-containing structures, while scanning electron microscopy shows new island-like structures, 50–200 nm in diameter, on the modified surface.Keywords
This publication has 40 references indexed in Scilit:
- Influence of chemical modification of the surface of low-density polyethylene on its electret propertiesRussian Journal of Applied Chemistry, 2007
- Improvement of piezoelectric coefficient of cellular polypropylene films by repeated expansionsJournal of Electrostatics, 2007
- Thermal instability of electromechanical films of cellular polypropyleneIEEE Transactions on Dielectrics and Electrical Insulation, 2005
- Evaluation of piezoelectric poly(vinylidene fluoride) polymers for use in space environments. I. Temperature limitationsJournal of Polymer Science Part B: Polymer Physics, 2005
- Thermal stability of piezoelectricity for porous polytetrafluoroethylene electret filmJournal of Electrostatics, 2003
- Less can be more. Holes in polymers lead to a new paradigm of piezoelectric materials for electret transducersIEEE Transactions on Dielectrics and Electrical Insulation, 2002
- Piezo- and pyroelectricity of a polymer-foam space-charge electretJournal of Applied Physics, 2001
- Electromechanical response of cellular electret filmsApplied Physics Letters, 1999
- The measurement of the shear piezoelectric coefficients of polyvinylidene fluorideFerroelectrics, 1986
- Properties of polyethylene modified with phosphonate side groups. I. Thermal and mechanical propertiesJournal of Polymer Science: Polymer Physics Edition, 1977