Plasma electrolytic treatment of VT22 titanium alloy in electrolytes with carbon-containing compounds
- 1 January 2017
- journal article
- Published by Allerton Press in Surface Engineering and Applied Electrochemistry
- Vol. 53 (1) , 1-6
Abstract
The study investigates the influence of electrolyte compositions containing acetone, glycerol, sucrose, ethylene glycol and ammonium chloride on the properties of VT22 titanium alloy in the process of the anode plasma electrolytic treatment (PET). An X-ray diffractometer and a scanning electron microscopy (SEM) were used to characterize the phase composition and morphology of the modified surface. Tribological properties of the treated titanium alloy were evaluated using a pin-on-disc tribometer under lubricated testing conditions. The effect of electrolyte compositions on the corrosion resistance of the PET samples was examined by means of potentiodynamic polarization in a solution of Na2SO4. It was assumed that the PET provides the saturation of titanium alloy with oxygen and carbon and formation TiO2 with a rutile structure and carbon solid solution in titanium. The anode PET in an electrolyte with glycerol results in an increase in microhardness to 540 HV and a decrease in the corrosion current density by 2.4 times. The friction coefficient of the treated samples in anelectrolyte with sucrose can be reduced 7.5 times. The anode PET in all electrolytes enables todiminish the wear rate of the titanium alloy samples by 3 orders of magnitude and the surface roughness, too, due to the anode dissolution of titanium.Keywords
This publication has 14 references indexed in Scilit:
- Pack carburisation of commercially pure titanium with limited oxygen diffusion for improved tribological propertiesSurface and Coatings Technology, 2014
- Friction and wear properties modification of Ti–6Al–4V alloy surfaces by implantation of multi-charged carbon ionsWear, 2014
- Effect of carburization on electrochemical corrosion behaviours of TiAl alloyMaterials Science and Engineering: B, 2013
- Fretting wear of carburized titanium alloy against ZrO2 under serum lubricationTribology International, 2011
- Fabrication of TiC/WC ultra hard nanocomposite layers by plasma electrolysis and study of its characteristicsSurface and Coatings Technology, 2010
- Surface carburizing of Ti–6Al–4V alloy by laser meltingOptics and Lasers in Engineering, 2010
- Nanocrystalline ceramic coating on γ-TiAl by bipolar plasma electrolysis (effect of frequency, time and cathodic/anodic duty cycle)Ceramics International, 2009
- Pulsed nanocrystalline plasma electrolytic carburising for corrosion protection of a γ-TiAl alloy: Part 1. Effect of frequency and duty cycleJournal of Alloys and Compounds, 2008
- Neural networks prediction of different frequencies effects on corrosion resistance obtained from pulsed nanocrystalline plasma electrolytic carburizingMaterials Letters, 2008
- Enhancing the microstructure and properties of titanium alloys through nitriding and other surface engineering methodsSurface and Coatings Technology, 2005