Simulation Study on the Evolution Behaviour of Endogenous Third Bodies in the Rough Friction Interface During Braking and Their Impact
Open Access
Abstract
During braking, high-power wind turbine disc brake friction pairs experience thermo-mechanical interactions at the interface, which lead to both physical and chemical changes. The friction interface features asperities and embedded hard particles within the substrate. Wear debris from these asperities or dislodged hard particles accumulates at the interface, continuing to participate in the friction process—a phenomenon known as the “endogenous third body”. Throughout braking, the microscopic morphology and contact conditions of the interface evolve dynamically. The stress–strain distribution and vibration behaviour of the friction system, influenced by the endogenous third body, also vary with braking parameters. This study employs the W-M fractal theory to develop a finite element model of a rough friction interface containing hard-particle endogenous third bodies. The model is validated through experimental testing. Based on the performance test parameters of high-power wind turbine disc brakes, a simulation is conducted to analyse the contact friction process involving the endogenous third body at the rough interface between the brake disc and brake pad. The simulation reproduces the formation process of the endogenous third body and reveals its evolutionary stages, including “ploughing”, “gap-filling”, and “aggregation”. Additionally, the study examines changes in the internal stress–strain and vibration states of the friction system under varying braking speeds (5 m/s to 35 m/s) and braking loads (3 MPa to 6 MPa). The findings demonstrate how different braking parameters influence the friction system containing the endogenous third body. The results showed that when the braking speeds were 5 m/s, 15 m/s, 25 m/s, and 35 m/s, and the braking load was 6 MPa, the average amplitude of the brake pads was the smallest, at 0.017 mm, 0.021 mm, 0.025 mm, and 0.020 mm, respectively. This research provides valuable insights into the three-body contact friction mechanism at the micro-braking interface, the formation of composite material third bodies, and the role of wear-stage third bodies in affecting the friction interface.Keywords
Funding Information
- General Program of National Natural Science Foundation of China (52375169)
This publication has 32 references indexed in Scilit:
- Wear in Progress: How Third Body Flow Controls Surface DamageTribology Letters, 2024
- Roughness Evolution Induced by Third-Body WearTribology Letters, 2024
- The Influence of Adding Copper and Iron Third Body on Brake Disc TemperatureTribology Letters, 2023
- Role of Minimum Adhesive Wear Particle Size in Third-Body Layer PropertiesTribology Letters, 2023
- Frictional performance of C/C–SiC materials at high loads: The role of composition and third-bodyOpen Ceramics, 2023
- Modelling of third body effect on rolling contact fatigue damageMechanics Research Communications, 2022
- Analysis of surface roughness morphology with TRIZ methodology in automotive electrical contacts: Design against third body fretting-corrosionTribology International, 2020
- Third-body and crack behavior in white etching layer induced by sliding–rolling frictionTribology International, 2019
- Experiment to Investigate the Relationship Between the Third-Body Layer and the Occurrence of Squeals in Dry Sliding ContactTribology Letters, 2019
- The third-body approach: A mechanical view of wearWear, 1984