Surface Texture Designs to Improve the Core–Veneer Bond Strength of Zirconia Restorations Using Digital Light Processing
Open Access
- 5 September 2023
- Vol. 16 (18) , 6072
Abstract
Veneered zirconia ceramics are widely used for dental restorations. However, the relatively poor bonding strength between the ceramic core and veneer porcelain remains a common problem in clinical applications. To address this issue, this study focused on enhancing the core–veneer bond strength of zirconia restorations through the implementation of surface textures using digital light processing (DLP) technology. The light intensity was precisely tuned to optimize mechanical strength and minimize light scattering. Subsequently, hexagonal or square grids were printed on the surface of the zirconia ceramic core. Following veneering procedures, the shear bond strength (SBS) test was conducted using a universal testing machine. Dates were compared using analysis of variance (ANOVA) and the least significant difference (LSD) test. Furthermore, optical microscopy and scanning electron microscopy (SEM) were used to examine the failure modes and observe the cross-sectional structures, respectively. The results indicated that the presence of a 0.09 mm high hexagon grid led to a significant 21% increase in the SBS value. However, grids with heights of 0.2 and 0.3 mm showed less improvement, owing to the formation of large defects at the interface during the fusion process. This study demonstrated the potential of DLP technology in preparing zirconia ceramics with complex structures and high mechanical strength, thereby offering promising solutions for overcoming challenges associated with dental applications.Keywords
Funding Information
- National Clinical Research Center for Oral Diseases (LCA202011)
This publication has 36 references indexed in Scilit:
- Influence of surface treatments on the surface properties of different zirconia cores and adhesion of zirconia-veneering ceramic systemsDental Materials, 2013
- A new modified laser pretreatment for porcelain zirconia bondingDental Materials, 2013
- Evaluation of a conditioning method to improve core-veneer bond strength of zirconia restorationsThe Journal of Prosthetic Dentistry, 2012
- Shear Bond Strength of Resin Cement to Zirconia Ceramic After Aluminum Oxide Sandblasting and Various Laser TreatmentsPhotomedicine and Laser Surgery, 2011
- Photopolymerization of powder suspensions for shaping ceramicsJournal of the European Ceramic Society, 2011
- Shear bond strengths of pressed and layered veneering ceramics to high-noble alloy and zirconia coresThe Journal of Prosthetic Dentistry, 2011
- A comparison of bond strength of layered veneering porcelains to zirconia and metalThe Journal of Prosthetic Dentistry, 2010
- Is the soft-start polymerisation concept still relevant for modern curing units?Clinical Oral Investigations, 2009
- Shear bond strengths between different zirconia cores and veneering ceramics and their susceptibility to thermocyclingDental Materials, 2008
- Gas Release and Foam Formation During Melting and Fining of GlassJournal of the American Ceramic Society, 2005