Jiang Wu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jiang Wu has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
Yicheng Cheng
Department of Stomatology, Jinling Hospital, Medical School of Nanjing University, Nanjing, China
4 shared publicationsBo Gao
State Key Laboratory of Military Stomatology & National Clinical Research Center for Oral Diseases & Shaanxi Key Laboratory of Stomatology, Department of Prosthodontics, School of Stomatology, Fourth Military Medical University, Xi'an, 710032, China
3 shared publications- Bo Gao
Department of Orthopedic Surgery Xijing Hospital, Fourth Military Medical University Xi'an shaanxi China
3 shared publications Hai Yu
Lecture, State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration & National Clinical Research Center for Oral Diseases & Shaanxi Key Laboratory of Stomatology, Department of Prosthodontics, School of Stomatology, Fourth Military Medical University, Xi'an, PR China
3 shared publicationsHuifang Ren
Department of Prosthodontics, State Key Laboratory of Military Stomatology, School of Stomatology, Fourth Military Medical University, Xi'an, People's Republic of China; Department of Prosthodontics, Shaanxi Key Laboratory of Stomatology, Xi'an, People's Republic of China
3 shared publicationsWenxi Shan
State Key Laboratory of Oral & Maxillofacial Reconstruction and Regeneration & National Clinical Research Center for Oral Diseases & Shaanxi Key Laboratory of Stomatology, Department of Dental Materials, School of Stomatology, Fourth Military Medical University, Xi'an, China
3 shared publications
Latest Publications
- 30 July 2026
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 12 (8) , 4236-4248
Enhanced Biological Performance of Fractal Geometry Design on Titanium for Dental Implant Application: An In Vitro Study
This study evaluates the biological performance of titanium surfaces featuring fractal geometry designs—Koch snowflake (KS) and Sierpinski pentagon (SP)—fabricated by selective laser melting (SLM). Fractal titanium specimens with increasing hierarchical iterations were digitally designed and manufactured. Surface characteristics were comprehensively analyzed. Rat bone marrow mesenchymal stem cells (rBMMSCs) were cultured on fractal and smooth titanium surfaces (control) to assess cytotoxicity, adhesion, proliferation, and osteogenic differentiation via CCK-8, live/dead staining, fluorescence imaging, DNA quantification, alkaline phosphatase activity, Alizarin Red staining, and gene expression analysis (BMP2, RUNX2, OCN, COL-1). Mechanistic pathways involving Piezo1 and ATF4 were investigated using qRT-PCR and Western blot. Fractal surfaces exhibited significantly increased hierarchical roughness and superior hydrophilicity compared to controls. All specimens demonstrated excellent cytocompatibility. Fractal designs significantly enhanced cell adhesion, proliferation, and osteogenic activity from Day 7 onward, with higher hierarchical iterations showing superior performance. ALP activity, mineralization, and osteogenic marker expression were significantly upregulated on fractal surfaces. Importantly, multiple regression analysis revealed that fractal dimension independently contributed to cell proliferation (β = 0.38, p = 0.04) beyond the effect of roughness alone, and higher-order fractal iterations enhanced ALP activity and mineralization by 60–80% compared to smooth controls. Mechanistically, fractal geometries activated Piezo1 mechanosensitive channels and upregulated ATF4 expression. In general, fractal microarchitectures exhibit hierarchical features that enhance surface bioactivity through combined physical and biochemical cues, activating mechanotransduction pathways to promote osteoblast differentiation. Furthermore, fractal-designed titanium implants fabricated via SLM represent a promising strategy for improving osseointegration and long-term stability in dental applications.
- 30 July 2026
- Published by American Chemical Society (ACS) in ACS Biomaterials Science & Engineering
- Vol. 12 (8) , 4236-4248
Enhanced Biological Performance of Fractal Geometry Design on Titanium for Dental Implant Application: An In Vitro Study
This study evaluates the biological performance of titanium surfaces featuring fractal geometry designs—Koch snowflake (KS) and Sierpinski pentagon (SP)—fabricated by selective laser melting (SLM). Fractal titanium specimens with increasing hierarchical iterations were digitally designed and manufactured. Surface characteristics were comprehensively analyzed. Rat bone marrow mesenchymal stem cells (rBMMSCs) were cultured on fractal and smooth titanium surfaces (control) to assess cytotoxicity, adhesion, proliferation, and osteogenic differentiation via CCK-8, live/dead staining, fluorescence imaging, DNA quantification, alkaline phosphatase activity, Alizarin Red staining, and gene expression analysis (BMP2, RUNX2, OCN, COL-1). Mechanistic pathways involving Piezo1 and ATF4 were investigated using qRT-PCR and Western blot. Fractal surfaces exhibited significantly increased hierarchical roughness and superior hydrophilicity compared to controls. All specimens demonstrated excellent cytocompatibility. Fractal designs significantly enhanced cell adhesion, proliferation, and osteogenic activity from Day 7 onward, with higher hierarchical iterations showing superior performance. ALP activity, mineralization, and osteogenic marker expression were significantly upregulated on fractal surfaces. Importantly, multiple regression analysis revealed that fractal dimension independently contributed to cell proliferation (β = 0.38, p = 0.04) beyond the effect of roughness alone, and higher-order fractal iterations enhanced ALP activity and mineralization by 60–80% compared to smooth controls. Mechanistically, fractal geometries activated Piezo1 mechanosensitive channels and upregulated ATF4 expression. In general, fractal microarchitectures exhibit hierarchical features that enhance surface bioactivity through combined physical and biochemical cues, activating mechanotransduction pathways to promote osteoblast differentiation. Furthermore, fractal-designed titanium implants fabricated via SLM represent a promising strategy for improving osseointegration and long-term stability in dental applications.
- 27 January 2026
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 262, 115479
SHED-exosome-functionalized degradable fibrous coatings: Immunomodulatory engineering of titanium implant interfaces
- 27 January 2026
- Published by Elsevier in Colloids and Surfaces B: Biointerfaces
- Vol. 262, 115479
SHED-exosome-functionalized degradable fibrous coatings: Immunomodulatory engineering of titanium implant interfaces
- 25 October 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (3) , 587.e1-587.e8
Consistency of implant direction and RPD guide planes prepared with CAD-CAM templates, guiding rod templates, and freehand template: An in vitro comparison
- 25 October 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (3) , 587.e1-587.e8
Consistency of implant direction and RPD guide planes prepared with CAD-CAM templates, guiding rod templates, and freehand template: An in vitro comparison
- 27 March 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (1) , 42-46
Digital design and fabrication of a guiding template for preparing occlusal rest seats in removable partial denture abutments
- 27 March 2025
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 135 (1) , 42-46
Digital design and fabrication of a guiding template for preparing occlusal rest seats in removable partial denture abutments
- 25 August 2024
- Published by Elsevier in Journal of Dentistry
- Vol. 149, 105322
In vitro comparison of guide planes for removable partial dentures prepared with CAD-CAM-assisted templates, guiding rod templates, and freehand
- 25 August 2024
- Published by Elsevier in Journal of Dentistry
- Vol. 149, 105322
In vitro comparison of guide planes for removable partial dentures prepared with CAD-CAM-assisted templates, guiding rod templates, and freehand
- Open Access
- 1 June 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (6) , 065401
Fabrication and in vitro biological performance of a double-layered nanoparticles-microarc oxidation composite coating on titanium for dental implant application
Sufficient residual alveolar bone volume plays an important role in the success rate and service life of dental implants. However, alveolar bone deficiency is a common clinical phenomenon, and the alveolar bone would be further absorbed by peri-implant infection. Therefore, it is highly desirable to promote peri-implant alveolar bone regeneration and inhibit alveolar bone resorption when the alveolar bone mass is insufficient. For this purpose, a pH-sensitive double-layered nanoparticles-microarc oxidation (MAO) composite coating was fabricated on titanium for dental implant application in this study. The pH-sensitive double-layered nanoparticles were prepared by a poly(L-lactic acid) inner layer and a chitosan outer shell, containing stromal-cell derived factor-1, recombinant human bone morphogenetic protein 2 and osteoprotegerin. The composite coating was fabricated on MAO coating by cross-linking the pH-sensitive double-layered nanoparticles with gelatin. The surface morphology of the composite coating showed that the pH-sensitive double-layered nanoparticles were well distributed and tightly cross-linked in the pores of MAO coating. The composite coating could sustain release the three drugs for more than 30 days. With decreasing pH, the release of osteoprotegerin from the composite coating increased (p < 0.05). In vitro biological studies suggested that the composite coating exhibited no cytotoxicity, and can recruit bone marrow-derived mesenchymal stem cells (BMSCs), promote BMSC differentiation into osteoblasts, and inhibit osteoclast generation. Moreover, with decreasing pH, the inhibitory effect on osteoclast generation was enhanced (p < 0.05). It can be concluded that the fabricated composite coating, which can promote bone regeneration and inhibit bone resorption, has the potential to be applied on the surface of dental implant, especially when the residual alveolar bone is in poor condition.
- 1 June 2024
- Published by IOP Publishing in Materials Research Express
- Vol. 11 (6) , 065401
Open AccessFabrication and in vitro biological performance of a double-layered nanoparticles-microarc oxidation composite coating on titanium for dental implant application
Sufficient residual alveolar bone volume plays an important role in the success rate and service life of dental implants. However, alveolar bone deficiency is a common clinical phenomenon, and the alveolar bone would be further absorbed by peri-implant infection. Therefore, it is highly desirable to promote peri-implant alveolar bone regeneration and inhibit alveolar bone resorption when the alveolar bone mass is insufficient. For this purpose, a pH-sensitive double-layered nanoparticles-microarc oxidation (MAO) composite coating was fabricated on titanium for dental implant application in this study. The pH-sensitive double-layered nanoparticles were prepared by a poly(L-lactic acid) inner layer and a chitosan outer shell, containing stromal-cell derived factor-1, recombinant human bone morphogenetic protein 2 and osteoprotegerin. The composite coating was fabricated on MAO coating by cross-linking the pH-sensitive double-layered nanoparticles with gelatin. The surface morphology of the composite coating showed that the pH-sensitive double-layered nanoparticles were well distributed and tightly cross-linked in the pores of MAO coating. The composite coating could sustain release the three drugs for more than 30 days. With decreasing pH, the release of osteoprotegerin from the composite coating increased (p < 0.05). In vitro biological studies suggested that the composite coating exhibited no cytotoxicity, and can recruit bone marrow-derived mesenchymal stem cells (BMSCs), promote BMSC differentiation into osteoblasts, and inhibit osteoclast generation. Moreover, with decreasing pH, the inhibitory effect on osteoclast generation was enhanced (p < 0.05). It can be concluded that the fabricated composite coating, which can promote bone regeneration and inhibit bone resorption, has the potential to be applied on the surface of dental implant, especially when the residual alveolar bone is in poor condition.
- Open Access
Surface Texture Designs to Improve the Core–Veneer Bond Strength of Zirconia Restorations Using Digital Light Processing
Veneered zirconia ceramics are widely used for dental restorations. However, the relatively poor bonding strength between the ceramic core and veneer porcelain remains a common problem in clinical applications. To address this issue, this study focused on enhancing the core–veneer bond strength of zirconia restorations through the implementation of surface textures using digital light processing (DLP) technology. The light intensity was precisely tuned to optimize mechanical strength and minimize light scattering. Subsequently, hexagonal or square grids were printed on the surface of the zirconia ceramic core. Following veneering procedures, the shear bond strength (SBS) test was conducted using a universal testing machine. Dates were compared using analysis of variance (ANOVA) and the least significant difference (LSD) test. Furthermore, optical microscopy and scanning electron microscopy (SEM) were used to examine the failure modes and observe the cross-sectional structures, respectively. The results indicated that the presence of a 0.09 mm high hexagon grid led to a significant 21% increase in the SBS value. However, grids with heights of 0.2 and 0.3 mm showed less improvement, owing to the formation of large defects at the interface during the fusion process. This study demonstrated the potential of DLP technology in preparing zirconia ceramics with complex structures and high mechanical strength, thereby offering promising solutions for overcoming challenges associated with dental applications.
Open AccessSurface Texture Designs to Improve the Core–Veneer Bond Strength of Zirconia Restorations Using Digital Light Processing
Veneered zirconia ceramics are widely used for dental restorations. However, the relatively poor bonding strength between the ceramic core and veneer porcelain remains a common problem in clinical applications. To address this issue, this study focused on enhancing the core–veneer bond strength of zirconia restorations through the implementation of surface textures using digital light processing (DLP) technology. The light intensity was precisely tuned to optimize mechanical strength and minimize light scattering. Subsequently, hexagonal or square grids were printed on the surface of the zirconia ceramic core. Following veneering procedures, the shear bond strength (SBS) test was conducted using a universal testing machine. Dates were compared using analysis of variance (ANOVA) and the least significant difference (LSD) test. Furthermore, optical microscopy and scanning electron microscopy (SEM) were used to examine the failure modes and observe the cross-sectional structures, respectively. The results indicated that the presence of a 0.09 mm high hexagon grid led to a significant 21% increase in the SBS value. However, grids with heights of 0.2 and 0.3 mm showed less improvement, owing to the formation of large defects at the interface during the fusion process. This study demonstrated the potential of DLP technology in preparing zirconia ceramics with complex structures and high mechanical strength, thereby offering promising solutions for overcoming challenges associated with dental applications.
- 7 May 2023
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 133 (2) , 376-379
Digital design and fabrication of a template to prepare guiding planes in removable partial denture abutments
- 7 May 2023
- Published by Elsevier in The Journal of Prosthetic Dentistry
- Vol. 133 (2) , 376-379
Digital design and fabrication of a template to prepare guiding planes in removable partial denture abutments
- Open Access
- 1 March 2016
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 11, 1337-1347
In vivo evaluation of an antibacterial coating containing halogenated furanone compound-loaded poly(L-lactic acid) nanoparticles on microarc-oxidized titanium implants
To prevent peri-implant infection, a new antibacterial coating containing a halogenated furanone compound, (Z-)-4-bromo-5-(bromomethylene)-2(5H)-furanone-loaded poly(l-lactic acid) nanoparticles, has been fabricated. The current study was designed to evaluate the preventive effect of the antibacterial coating under a simulated environment of peri-implant infection in vivo. Microarc-oxidized titanium implants treated with minocycline hydrochloride ointment were used as positive control group, and microarc-oxidized titanium implants without any treatment were used as blank control group. Three kinds of implants were implanted in dogs’ mandibles, and the peri-implant infection was simulated by silk ligation and feeding high sugar diet. After 2-month implantation, the results showed that no significant differences were detected between the experimental and positive control groups (P>0.05), but the data of clinical measurements of the blank control group were significantly higher than those of the other two groups (PP<0.05). Scanning electron microscope observation and histological examination showed that more new bone was formed on the surface of the experimental and positive control groups. It can be concluded that the antibacterial coating fabricated on implants has remarkable preventive effect on peri-implant infection at the early stage.
- 1 March 2016
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 11, 1337-1347
Open AccessIn vivo evaluation of an antibacterial coating containing halogenated furanone compound-loaded poly(L-lactic acid) nanoparticles on microarc-oxidized titanium implants
To prevent peri-implant infection, a new antibacterial coating containing a halogenated furanone compound, (Z-)-4-bromo-5-(bromomethylene)-2(5H)-furanone-loaded poly(l-lactic acid) nanoparticles, has been fabricated. The current study was designed to evaluate the preventive effect of the antibacterial coating under a simulated environment of peri-implant infection in vivo. Microarc-oxidized titanium implants treated with minocycline hydrochloride ointment were used as positive control group, and microarc-oxidized titanium implants without any treatment were used as blank control group. Three kinds of implants were implanted in dogs’ mandibles, and the peri-implant infection was simulated by silk ligation and feeding high sugar diet. After 2-month implantation, the results showed that no significant differences were detected between the experimental and positive control groups (P>0.05), but the data of clinical measurements of the blank control group were significantly higher than those of the other two groups (PP<0.05). Scanning electron microscope observation and histological examination showed that more new bone was formed on the surface of the experimental and positive control groups. It can be concluded that the antibacterial coating fabricated on implants has remarkable preventive effect on peri-implant infection at the early stage.