Deposition of Diamond-Like Carbon Films on Inner Wall Surfaces of Millimeter-Size-Diameter Steel Tubes by Plasma Source Ion Implantation
Authors:
- 26 October 2011
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 39 (11) , 3140-3143
Abstract
Diamond-like carbon (DLC) film deposition on the interior surfaces of steel tubes was carried out by plasma source ion implantation. SUS304 austenitic-type stainless steel tubes with inner diameters of 9, 5, and 4 mm were used as substrate tubes. Acetylene was the working gas for the plasma that was generated by applying a negative pulse voltage of -18 kV to the substrates. The surface morphology of the films and the film thickness were observed by atomic force microscopy and scanning electron microscopy. The composition within the film and at the interface was examined by depth profiling with Auger electron spectroscopy and secondary ion mass spectrometry. The film structure was characterized by Raman spectroscopy. The friction coefficient of the untreated substrate and the DLC films was evaluated by a reciprocating sliding test. The DLC film surfaces were smooth, and no special structure was observed on the surface. The DLC film thicknesses, structure, and composition on the interior surface of the steel tube depend, on the one hand, on the gas and pulse conditions and, on the other hand, on the distance from the end of the tube, as well as on the diameter of the tube. A low friction coefficient of 0.2 was derived for the deposited DLC films.Keywords
This publication has 21 references indexed in Scilit:
- Uniform coating of thick DLC film on three-dimensional substratesNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2003
- Ion implantation into inner wall surface of millimeter size diameter steel tube by plasma source ion implantationSurface and Coatings Technology, 2002
- Deposition of diamond-like carbon films using plasma based ion implantation with bipolar pulsesSurface and Coatings Technology, 2002
- Plasma immersion ion implantation of complex-shaped objects: an experimental study on the treatment homogeneitySurface and Coatings Technology, 2000
- Ion implantation into inner wall surface of a 1-m-long steel tube by plasma source ion implantationSurface and Coatings Technology, 2000
- Interpretation of Raman spectra of disordered and amorphous carbonPhysical Review B, 2000
- Inner surface ion implantation using deflecting electric fieldNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1998
- Development of an energetic ion assisted mixing and deposition process for TiNx and diamondlike carbon films, using a co-axial geometry in plasma source ion implantationJournal of Vacuum Science & Technology A, 1997
- New plasma source ion-implantation technique for inner surface modification of materialsNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 1996
- Plasma immersion ion implantation using plasmas generated by radio frequency techniquesApplied Physics Letters, 1988