Enhancement the Fatigue Life of Floating Breakwater Mooring System Using Tuned Liquid Column Damper
Open Access
- 1 January 2019
- journal article
- research article
- Published by FapUNIFESP (SciELO) in Latin American Journal of Solids and Structures
- Vol. 16 (7)
Abstract
Safety is a key design criterion for floating structures. A high rate of mooring accidents has been reported over the past decades. Preventing mooring line failure is a key design objective for floating breakwater systems. The mooring system comprises sets of mooring lines anchored to the seabed. These components are exposed to highly cyclic nonlinear load fluctuations induced by an irregular wave climate during their service life. DNVGL-OS-E301 classifies the mooring lines for floating breakwaters as long-term elements that should be evaluated according to the fatigue limit state. Fatigue of mooring lines needs to be monitored and evaluated to warrant the station keeping and integrity of overall system. Applying an additional control device to a floating breakwater mitigates the structural response and hence mobilized tension in mooring system. The focus of present study was to examine the effect of an additional control device on fatigue life of mooring lines for floating breakwaters. To evaluate the effect of a control device on the fatigue behavior of mooring lines, a floating breakwater was simulated with a tuned liquid column damper (TLCD) attached. A time-dependent approach based on S-N curves in conjunction with the Palmgren-Miner rule was employed to evaluate the mooring line fatigue. This paper presents a further parametric study focused on the effect of TLCD on fairlead point displacement, mobilized tension, damage rate, and fatigue life of mooring lines. The results showed that TLCD increased the fatigue life of mooring line and thus dramatically decreased the likelihood of the mooring system being damaged by fatigue. This would reduce the maintenance costs and increase the lifetime and operational safety of floating breakwater. In addition, the presented case study showed that failure probability of mooring lines against fatigue damage was also reduced and was acceptable for the safety factor defined in DNVGL-OS-E301. This proposed approach of applying a TLCD is a practical tool for designing the components of a floating breakwater more efficiently.Keywords
This publication has 28 references indexed in Scilit:
- Structural control of floating wind turbinesMechatronics, 2011
- Experiments on wave transmission coefficients of floating breakwatersOcean Engineering, 2008
- Rainflow fatigue analysis for loads with multimodal power spectral densitiesMarine Structures, 2008
- Fatigue damage induced by nonGaussian bimodal wave loading in mooring linesApplied Ocean Research, 2007
- Analysis of shaped floating breakwater in oblique waves: I. Impervious rigid wave boardsApplied Ocean Research, 2006
- Control of pedestrian-induced vibrations of long-span bridgesStructural Control and Health Monitoring, 2005
- Stiffness of mooring lines and performance of floating breakwater in three dimensionsApplied Ocean Research, 2005
- Floating pontoon breakwatersOcean Engineering, 2000
- Dual pontoon floating breakwaterOcean Engineering, 1997
- A history of fatigueEngineering Fracture Mechanics, 1996