Effect of Deflector on the Combustion Characteristics of a Micro-Combustor With a Controlled Centrally Slotted Bluff Body
- 13 December 2023
- journal article
- research article
- Published by Wiley in Journal of Energy Resources Technology
- Vol. 146 (2) , 1-17
Abstract
Flame tip-opening in a micro-combustor with a controlled centrally slotted bluff body adversely affects the combustion characteristics, leading to reduced average combustion efficiency and exhaust gas temperature. To minimize the adverse effects of the flame tip-opening, a deflector is introduced in the micro-combustor, downstream to the bluff body, and its effect on various combustion parameters is studied. The insertion of a deflector significantly increases the exhaust gas temperatures in the central region by establishing a secondary flame root. However, sudden changes in the flow direction caused by the insertion of deflector induce a sudden expansion-compression strain on the flame front, thereby slightly reducing the temperature of the flame zones on either side of the central region. A downstream shift in the position of the deflector marginally mitigates the adverse effects of sudden expansion-compression strain on the exhaust gas temperature, as they are induced within the secondary reaction flame zones. On the other hand, the downstream shift of the deflector negatively impacts the exhaust gas temperature in the central region due to the reduced length available for near-complete combustion downstream of the secondary flame root. In conclusion, the deflector positioned farther from the outlet is found to result in better overall combustion characteristics at higher controllable flow ratios.Keywords
This publication has 52 references indexed in Scilit:
- A review of progress in heat recirculating meso-scale combustorsApplied Energy, 2011
- Performance characteristics of methanol and kerosene fuelled meso-scale heat-recirculating combustorsApplied Energy, 2011
- Strain Characteristics Near the Flame Attachment Point in a Swirling FlowCombustion Science and Technology, 2011
- Investigations into the flame stability limits in a backward step micro scale combustor with premixed methane–air mixturesJournal of Micromechanics and Microengineering, 2010
- Experimental investigation of porous media combustion in a planar micro-combustorFuel, 2010
- Effects of catalytic walls on hydrogen/air combustion inside a micro-tubeApplied Catalysis A: General, 2007
- Numerical modeling of non-adiabatic heat-recirculating combustorsProceedings of the Combustion Institute, 2007
- An updated comprehensive kinetic model of hydrogen combustionInternational Journal of Chemical Kinetics, 2004
- Microscale combustion research for application to micro thermophotovoltaic systemsEnergy Conversion and Management, 2003
- Perspective: A Method for Uniform Reporting of Grid Refinement StudiesJournal of Fluids Engineering, 1994