Analysis of the pooled effect of compression ratio and injection timing variation on conventional diesel engine powered with nano doped biodiesel blend
Open Access
- 1 July 2025
- journal article
- research article
- Published by Springer Nature in Scientific Reports
- Vol. 15 (1) , 1-17
Abstract
This research aims to explore how incorporating nanoparticles into a biodiesel-diesel blend influences the performance, combustion, and emission characteristics of a diesel engine under varying conditions, including compression ratios, engine loads, and injection timings. The biodiesel and nanoparticles considered for this investigation are mahua biodiesel and Titanium oxide nanoparticles (TiO2), respectively. The experimental fuel is formulated by blending diesel and mahua biodiesel with the addition of titanium oxide nanoparticles. In this study, compression ratio is varied from 17.5 to 18, whereas fuel injection timing of 20°, 23°, and 25° BTDCs along with engine load variation of 20%, 40%, 60%, 80%, and 100% are considered. The experimentation utilized a single-cylinder diesel engine equipped with a variable compression ratio (VCR) feature and a power output of 3.5 kW. The results indicate that the maximum brake thermal efficiency was achieved at a compression ratio of 18 and a fuel injection timing of 20° before Top Dead Center. For the same setting, the nanoparticle-enriched biodiesel-diesel blend exhibited the lowest levels of CO and HC emissions among all test runs, with reductions of 45.34% and 40%, respectively, compared to standard diesel operation.Keywords
This publication has 60 references indexed in Scilit:
- A green process for biodiesel and hydrogen coproduction from waste oils with a magnetic metal-organic framework derived materialBiomass and Bioenergy, 2023
- Using oxy-hydrogen gas to enhance efficacy and reduce emissions of diesel engineAin Shams Engineering Journal, 2023
- Effect of microalgae biodiesel blending on diesel engine characteristicsHeat Transfer, 2022
- Effect of low CeO2 nanoparticles dosage in biodiesel-blends on combustion parameters and toxic pollutants from common-rail diesel engineAtmospheric Pollution Research, 2022
- The role of nanoparticles on biofuel production and as an additive in ternary blend fuelled diesel engine: A reviewEnergy Reports, 2021
- Artificial intelligence‐based model prediction of biodiesel‐fueled engine performance and emission characteristics: A comparative evaluation of gene expression programming and artificial neural networkHeat Transfer, 2021
- Impact of aluminium oxide nanoparticles as an additive in diesel-methanol blends on a modern DI diesel engineApplied Thermal Engineering, 2021
- Nanoparticles as additive in biodiesel on the working characteristics of a DI diesel engineAin Shams Engineering Journal, 2018
- Combustion characteristics, engine performances and emissions of a diesel engine using nanoparticle-diesel fuel blends with aluminium oxide, carbon nanotubes and silicon oxideEnergy Conversion and Management, 2018
- Optimisation of injection timing and compression ratio of a raw biogas powered dual fuel diesel engineApplied Thermal Engineering, 2016